SVAT Electronics GX5201 instruction manual Monitor Functions

SVAT ELECTRONICS

Now You Can See

the preset level, the monitor will display the picture from that camera for a few seconds, and the beeper will sound. To avoid searching the channels that do not have cameras/transmitters assigned to them, set those corresponding dip switches (located on the back panel of the monitor) to the OFF position.

The dwell/cycle time (time taken to switch between cameras) is preset to four seconds and can be adjusted between 2-30 seconds. To adjust the dwell/cycle time, hold down both the AUTO and MANUAL buttons simultaneously. The monitor will chime for each second it is adding to the dwell time. Release the buttons, and the LED light will flash for each second that was added to the dwell time. Increasing the dwell/cycle time past 30 seconds will revert it back to 2 seconds.

Manual

To view a specific camera on the monitor, press the MANUAL button. The monitor will switch to a different camera each time the MANUAL button is pressed. To avoid searching the channels that do not have cameras assigned to them, set those corresponding dip switches (located on the back panel of the monitor) to the OFF position.

MONITOR FUNCTIONS

Power

- Press to turn the monitor on/off

Alarm Volume

-The ALARM VOLUME of the monitor can be changed by adjusting the Alarm

-Volume Tuner located on the top of the monitor.

Volume

-The sound level can be adjusted by pressing the + or - buttons on the front of the monitor.

Menu

-Press the Menu button to get the following options:

-LED on, adjust brightness using + or -

-LED flashing, adjust color using + or -

-LED off, adjust contrast using + or -

GX5201 5