Installation Procedures (see diagram below)
Installation
1. Locate the area you would like to place your camera. Please note that you have a maximum distance of 60ft supplied with this
unit.
2. You will have to rotate the camera bracket to uncover the screw insertion areas. Install the camera accordingly.
Note: the camera can operate standing alone but screws will provide more support. (Picture on right)
3.Plug the correct end of the supplied cable to the back of the camera.
4.Locate the area where you will place your monitor
and plug it in. Make sure that the power is turned off before you proceed. To turn off the monitor press the power button in the front of the monitor.
5.Plug the cable into the audio/video input jacks. Make sure that the white and yellow plugs on the cable correspond with the white and yellow jacks on the monitor.
6.Turn the monitor on. The feed from the camera should be on the monitor. If not, press the function switcher button to change the channel.
7.If you would like to record on your VCR, plug RCA cables into the audio/video output jacks on the monitor and match them into the corresponding jacks on your VCR input jack. Switch to your VCR’s input channel and you can now record.
Easy View
Instructions
to power outlet
5
w w w . s v a t . c o m
