Nighthawk
A
Package Contents | B | Connecting the receiver to record on a VCR |
Packaging |
| Quick Start Manual |
|
| |
|
| Receiver Power |
|
| Supply |
| 2 or 3 NightHawk |
|
| Cameras |
|
| Receiver |
|
Hardware |
|
|
|
| Camera Power |
Remote Control | AV Cable | Supplies |
|
CConnecting the receiver to your TV
Back of ReceiverBack of TV
INPUTS 1 3
RECEIVER
AUDIO VIDEOLINE IN
TV
D.Plug the power supply into the receiverComponentINPUTS
Video | 1 | 2 |
|
| |
INPUTS | Video | |
1 | 3 | OUTPUT |
|
Connect the A/V cable | VCR |
from the receiver to | |
the VCR |
|
LINE OUT
Connect the A/V cable C. to the INPUT on theback of the TVConnect an A/V cableB.from the Line OUTPUT on the back of the VCRD | Viewing the cameras and recording to VCR |
1.Connect the AV cable to the back of the Receiver
2.Connect the AV cable to an available Video INPUT on TV
3.Tune TV to the correct INPUT* using TV remote
1.Power on the Receiver, VCR and TV
2.Using your TV’s remote control tune your TV to the correct INPUT*. In our
example above the TV should be set to INPUT 1
3.Using your VCR’s remote
control tune your VCR to the LINE 1 INPUT*
4. You should now see |
your cameras on the |
TV screen. Follow |
your manufacturer’s |
instructions to |
record to your VCR |
*Some VCR’s and TV’s will list this as INPUT, A/V, SOURCE, L1, Channel 0 - Consult your manufacturer’s manual for more information