Swann 4 CH Digital Video Recorder user manual Dwell, Pip, Motion

4. QUALITY

There are four quality settings during an

ALARM : BASIC, BEST, HIGH, NORMAL.

5. RECORD MODE

There are three recording settings : QUAD-FRAME, QUAD-FIELD,

MULTIPLEX.

DWELL

1. NORM

To set up the DWELL time period that each channel auto sequentially shows on call monitor. The level is from 1 to 15 SEC or OFF.

2. ALARM

To set up the DWELL time period when alarm input is triggered.

The level is from 1 to 15 SEC or OFF.

		(DWELL)
		NORM ALARM
PIP	CAM1	01	01
	CAM2	01	01
	CAM3	01	01
1. FULL SCREEN	CAM4	01	01

To set up the full screen background picture display.

2. PIP SCREEN

To set up the picture with a 1/9 size screen “insert”.

3. POSITION

There are six position settings : D/L, D/M, D/R, U/L, U/M, U/R.

	(PIP)
MOTION	FULL SCREEN	CAM 1
	PIP SCREEN	CAM 2
	POSITION	D/R

1. SEN (SENSITIVITY)

Sets the sensitivity of the pixel-based Motion Detection feature from 1fo 99. The highest sensitivity setting is 01, the lowest sensitivity setting is 99. The default setting is 70.

2. MD-NUM (MOTION DETECTION NUMBER)

Sets the number of targets in which Motion must occur in order to trigger an Alarm (from 1-99 target areas).

Note: MD-NUM cannot be less than the number of targets set in the AREA.

3. RE (REFERENCE)

Set the Reference image to which the current screen is compared (from 1-99). For example, the value 64 would compare the current image to the 64th previous screen image. The higher value may increase the sensitivity.

4. DET (DETECTION)

The motion detection on each channel can be turned to

ON or OFF individually.

(MENU)

TIMER CAMERA RECORD ALARM DWELL PIP MOTION DISPLAY REMOTE USER SYSTEM EVENT

(MENU)

TIMER CAMERA RECORD ALARM DWELL PIP MOTION DISPLAY REMOTE USER SYSTEM EVENT

(MENU)

TIMER CAMERA RECORD ALARM DWELL PIP MOTION DISPLAY REMOTE USER SYSTEM EVENT

14