The RS485 Controller
Quick Adjust - | Quick Adjust + |
Arrow Buttons | Main Menu |
The arrows are
used to navigate through the main menu.
Quick Config | Save Quick Config |
Using the Quick Configuration
The Quick Config button will give you instant access to the following settings:
1.DYNAMIC: Digital Wide Dynamic Range (DWDR) [page 10]
2.CONTRAST [page 14]
3.SHARPNESS [page 14]
4.BRIGHTNESS [page 9]
5.AUTO BW AT NIGHT: When disabled, the camera will attempt to create color images at night. This can result in increased color information at the cost of image quality.
•These settings are exactly the same as the ones in the Main Menu.
•Cycle through these settings by pressing the Quick Config button repeatedly.
•The Quick Adjust buttons will change the setting you’ve currently selected.
•To confirm a change and exit the Quick Configuration screen, click Save Quick Config.
Connecting the OSD Controller |
|
The two connections (RS485 and DC |
|
12V) are located on the bottom of |
|
the controller. |
|
Use the supplied RS485 jack and |
|
power splitter to connect the |
|
controller. A complete connection |
|
diagram is located on pages 4 - 5. | DC 12V In |
| RS485 Port |
3