Connection Guide
1.Connect the DC in plug on the camera cable to the DC out pin on the end of the extension cable.
2.Connect the BNC connector on the camera cable to the BNC connector on the extension cable.
3.Plug the green RS485 plug on the end of the camera cable to the RS485 port on the extension cable. You may need to connect the two wires to the RS485 plug. (See insert, above right).
1
2
3
4.Plug the RS485 connector on the far end of the extension cable into the PTZ controller. As with step 3, the plug may have to be connected to the wire terminals.
5.Connect the BNC Output on the end of the extension cable to your video monitoring/recording device (typically a DVR).
6.Connect one output from the power splitter to the DC in plug on the end of the extension cable.
7.Connect the other output of the power splitter to the DC in plug on the OSD controller.
8.Connect the power splitter’s DC in plug to the DC output jack on the power adapter, and connect the power adapter to a wall socket.
4