Swim'n Play end deck manual 18’ END DECK, 15’ END DECK, 12’ END DECK, Viewed From Above

Models: end deck

1 18

Page 3

1	Clear out and level the ground in the location where your deck is to be installed.

	Use the Assembly Drawings below for reference while assembling your deck
	(Note: ladder can be installed on either side).
	During assemly please note that the ledges on the pool are to be removed where the
	deck meets the pool. The extension on the front of the deck will replace your pool legde.
	Please refer to Step 7.

LADDER

LADDER

DRAWINGS

LADDER

Image 3

Contents

DANGER ASSEMBLY INSTRUCTIONSEND DECKS 12ft 15ft 18ftBARRIER REQUIREMENTS CONTRACT INSTALLATIONSGENERAL LOCAL CODESVIEWED FROM ABOVE 18’ END DECK15’ END DECK 12’ END DECK15’ END DECK & 18’ END DECK 12’ END DECKIMPORTANT ONLY HAND TIGHTEN SCREWS AT THIS TIME DECK TOP HEX NUTS CLOSE-UP#3CLOSE-UP#5 CLOSE-UP#4POOL 15’ END DECK & 18’ END DECK12’ END DECK IMPORTANT ONLY HAND TIGHTEN SCREWS AT THIS TIMEIMPORTANT ONLY HAND TIGHTEN SCREWS AT THIS TIME 15’ END DECK18’ END DECK 12’ END DECKCLOSE UP #10 15’ END DECK & 18’ END DECK12’ END DECK IMPORTANT ONLY HAND TIGHTEN SCREWS AT THIS TIMECLOSE-UP#15 IMPORTANT ONLY HAND TIGHTEN SCREWS AT THIS TIMECLOSE UP #13 CLOSE UP #12IMPORTANT: ONLY HAND TIGHTEN SCREWS AT THIS TIME 18’ END DECK15’ END DECK 12’ END DECKCLOSE UP #17 CLOSE UP #17CLOSE UP #4 For the 18’ Decks Only In the18’ END DECK 15’ END DECK12’ END DECK as described on the next page FENSURROUND INSTRUCTIONSGENERAL ASSEMBLY ILLUSTRATION and Hex Nuts provided as shown Fence Posts as described on the next page STANDARD POST FENCE BRAKET INSERTED THROUGH POST WARNING LABELS