7 | Before continuing, make sure that all the Posts are perfectly straight and tighten all |
| |
| screws and nuts securely. You may now remove the saw horse or patio blocks and allow |
| your deck to rest on the ground. |
Attach your assembled deck to your pool as shown.
Remove the ledges where the deck will be assembled.
Move your deck into its final position.
On the 12’ and 15’ End Decks attach the deck ledge to the verticle top plates.
Drill holes on top of the deck aligning with the holes of the top plates and tighten screws supplied for the removed ledges.
If your pool is equipped with full contour style ledge covers, it is necessary to cut them with a hacksaw as illustrated below.
This will enable the deck to mount closer to the pool.
VIEW FROM
ABOVE
PLATES 
CUT COVER
18’ END DECK
VIEW FROM
ABOVE
PLATES 
CUT COVER
15’ END DECK
VIEW FROM
ABOVE
PLATES 
CUT COVER
12’ END DECK
12
