Swim'n Play end deck manual Close UP #4, Close UP #17 Close UP #11

In the locations marked “Location A” (see the	CLOSE UP #17
previous page), attach Angle Support Bars to
the top of the Post and Deck as illustrated in	ANGLE
Close-up #16 at right. Also attach Angle	SUPPORT
	BAR
Support Bars to the bottom of the Post and
the Bottom Support Channel as illustrated in
Close-up #17 at right. Note: Where One Angle
Support Bar attach to the Post use the ½”	CLOSE UP #16
Sheet Metal Screws. Where Two Angle
Support Bars attach to the Post use the 1”
Sheet Metal Screw. Where they attach to	PATIO
either the deck or the Bottom Support Channels.

1/4” x 20	1/4” x 20 x 1/2”	1/2” SHEET
HEX NUT	TRUSS HEAD SCREW	METAL SCREW
In the locations marked “Location C”					ANGLE
					SUPPORT
(see the previous page), attach			CLOSE UP #4		BARS
49-5/16” Posts to the Deck as illustrated					1” SHEET
in Close-up #4 at right. Also attach Angle				DECK	METAL SCREW
Support Bars to the top of the Posts and
the deck as illustrated in Close-up #12
at right. Note: Where One Angle Support
Bar attach to the Post use the ½” Sheet
Metal Screws. Where Two Angle Support
Bars attach to the Post use the 1” Sheet					CLOSE UP #12
Metal Screw. Where they attach to the deck				49-5/16”
use ½” Truss Head Screws and Hex Nuts.			SHORT	POST
			POST		DECK
For the 18’ Decks Only: In the			BAR
locations marked “Location B” (see the
previous page), attach Angle Support Bars						ANGLE
to the top of the Post and Deck as illustrated						SUPPORT
in Close-up #11 at right. Also attach Angle						BAR

Support Bars to the bottom of the Post and the Bottom Support Channel as illustrated in Close-up #17 at right.

Note: Where One Angle Support Bar attach to the Post use the ½” Sheet Metal Screws.

Where Two Angle Support Bars attach to the Post use the 1” Sheet Metal Screw.

Where they attach to either the deck or the Bottom Support Channels use ½” Truss Head Screws and Hex Nuts.

CLOSE UP #17	CLOSE UP #11
ANGLE
SUPPORT
BAR	DECK

1” SHEET METAL

ANGLE SCREW

SUPPORT

BAR

11