Item # | Part # | Description |
10 | NB181 | Nut - Nyloc 5/16-18 ZY |
23 | 10981TK | Mount - Weldment; Truck Spreader |
25 | NB579 | Washer - Fender, 5/16 X 1 1/4 OD ZY GR2 |
26 | 9855 | Bolt - U, Sq 3/8-16 x 1 5/8" x 2 1/2" |
27 | 11728TK | Support - Weldment; Truck Spreader |
| 10176 | Lid - Tank |
| 10531 | Adapter - Kit, 12 Volt |
Step 6:
Attach the Mounting Weldment (23) to the Spreader Assembly by putting the U-Bolts (26) over the Mounting Tubes (21 & 22) and into the holes on the Mounting Weldment (23). Mount the Support Weldment (27) onto the rear of the Mount Weldment (23) and place the Washers (27) onto the Bolts (26) as shown and thread the Nuts (10) in place. Making sure that the support tubes are resting on the lip provided, tighten the nuts, securing the Mounting Weldment (23) and Support Weldment (27) to the Spreader Assembly.
