Infrared Setup for Windows XP
For Windows XP, no additional drivers or applications are required to use the XTNDAccess IrDA PC Adapter. However, the following setup must be performed in order for the Adapter to work with your computer.
1.Verify the serial connector of the Adapter is attached to a serial port of the computer.
2.From the Start menu, select Control Panel, and then
3.From the Add Hardware wizard, click Next.
4.Select Yes, I have already connected the hardware and click Next.
5.From the list of installed hardware, select Add a new hardware device and click Next.
6.Select Install the hardware that I manually select from a list (Advanced) and click Next.
7.Select Infrared devices and click Next.
8.Choose Extended Systems as the manufacturer.
9.Choose
10.On the Hardware to Install screen, click Next.
11.From the Serial Port list, select the COM port number to which the Adapter is attached and click Next.
10
