Sybase XTNDAccessTM manual Infrared Setup for Windows, Select Add a New Device and click Next

Infrared Setup for Windows 2000

For Windows 2000, no additional drivers or applications are required to use the XTNDAccess IrDA PC Adapter. However, the following setup must be performed in order for the Adapter to work with your computer.

1.Verify the serial connector of the Adapter is attached to a serial port of the computer.

2.From the Start menu, select Settings, Control Panel, and then Add/ Remove Hardware.

3.Select Add/Trouble Shoot a device. Windows will search for Plug and Play devices and then return a list of device options.

4.Select Add a New Device and click Next.

5.Select Choose the device and click Next.

6.From the list of Device Types, select Infrared devices and click Next.

7.Choose Extended Systems as the manufacturer.

8.Choose ESI-9680 JetEye Serial Infrared Device as the infrared device and click Next. The Adapter will now begin to search for infrared devices in range.

NOTE: Additional installation instructions and troubleshooting tips are included in the online documentation on the CD-ROM.

9