- REAR VIEW -
ANT.
17 DISPLAY button– Hit to display the counter or the current channel number and current time on the TV screen. (Refer to page 25.)
18 STOP button– Hit to stop the tape motion.
Lbutton– (Remote control)
•Hit to select a mode or figure from the setting menu.
19 RECORD button– Hit to start manual recording. 20 SPEED button– Hit to choose the desired record-
ing speed:SP/SLP.
21
COUNTER RESET button– Hit to reset counter to 0:00:00.
22 GAME button– Hit to set the Game mode and external input mode at the same time. (Refer to page 11.)
2930
23 TIME SEARCH button– Hit to activate Time Search mode.
24 PAUSE/STILL F button– Hit to temporarily stop the tape during the recording or to view a still pic- ture during playback.
25 MUTE button– Hit to mute the sound. Hit it again to restore the sound.
26 CHANNEL RETURN button– Hit to go back to the previously viewed channel. Hit again to return to the present channel.
27 EJECT A button– Hit in the stop mode to remove the cassette from the unit.
28
29 Power cord– Connect to a standard AC outlet (120V/60Hz). (Refer to page 10.)
30 ANT(ENNA). jack– Connect to an antenna, cable system or satellite system. (Refer to page 9.)
INSTALLING THE BATTERIES
1)Open the battery compartment cover by pressing the cover on the remote unit in the direction of the arrow.
2)Insert 2 “AA” penlight batteries into the battery compartment in the direction indicated by the polarity
3)Replace the cover.
[BATTERY PRECAUTIONS]
•Be sure to follow the correct polarity as indicated in the battery compartment. Reversed batteries may cause damage to the device.
•Do not mix different types of batteries together (e.g. Alkaline and
•If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.
•Do not try to recharge batteries not intended to be recharged; they can overheat and rupture.
- 8 - | EN |
