6 Select the hour | – MANUAL CLOCK SET – | |||
Press [PLAY/K] or [STOP/L] | MONTH DAY |
| YEAR | |
until your desired hour appears. | 0 5 | / 0 5 | THU | 2 0 0 5 |
(Example: “5”, “PM”) | HOUR | MINUTE |
| |
Then hit [F.FWD/ B]. | 0 5 | : – – | PM |
|
|
|
|
| |
|
|
|
|
|
7 Select the minute | – MANUAL CLOCK SET – | |||
Press [PLAY/K] or [STOP/L] | MONTH DAY |
| YEAR | |
until the desired minute appears. | 0 5 | / 0 5 | THU | 2 0 0 5 |
(Example: “40”) | HOUR | MINUTE |
| |
| 0 5 | : 4 0 | PM |
|
8 Start the clock
Hit [MENU].
5:40 PM
Although seconds are not dis- played, they begin counting from 00 when you hit [MENU]. Use this feature to synchronize the clock with the correct time.
NOTE:
•When unplugging the AC cord or if there is a power failure for more than 3 seconds, you may have to reset the clock.
TO CHANGE CLOCK SETTING
If you want to change the clock, 1)Follow steps 1 to 2 on page 13.
2)Select the item you want to change using [REW/s] or [F.FWD/ B].
3)Enter correct numbers using [PLAY/K] or [STOP/L].
4)Hit [MENU] to start the clock.
NOTE:
•If there is no local PBS station in your area or on your cable system, select “AUTO CLOCK” and press [REW/s] or [F.FWD/ B] to turn [OFF] this function. Then you can manually adjust the clock.
AUTOMATIC CLOCK SETTING
Make sure ...
•The unit must be turned on.
•Confirm the unit is receiving a RF (Radio Frequency) signal from either an antenna or cable system connection using the ANT. jack on the rear of the unit.
NOTES:
•If a cable converter box is being used, make sure it is powered on.
•You must use the remote control to perform the clock setting procedure.
•If the unit is connected directly to a cable converter box or satellite box, the local PBS station must be selected on the cable box itself and the unit must be set to the output channel of the cable converter box or satellite box (usually channel 3 or 4), to be able to set up or correct the clock automatically.
1 Select “SETTING CLOCK” | – M E N U – |
|
Hit [MENU]. | TIMER PROGRAMMING | |
B SETTING CLOCK |
| |
| PICTURE CONTROL |
|
Press [PLAY/K] or [STOP/L] to | CHANNEL SET UP |
|
| ||
| USER’S SET UP |
|
select “SETTING CLOCK”, then | LANGUAGE [ENGLISH] | |
CAPTION [OFF] |
| |
hit [F.FWD/ B]. | ZERO RETURN |
|
TIME SEARCH |
| |
|
|
|
2 Set “AUTO CLOCK” to [ON] | – SETTING CLOCK – | |
Hit [F.FWD/ B] until “AUTO | B AUTO CLOCK | [ON] |
CLOCK [ON]” appears. | AUTO CLOCK CH SEARCH | |
MANUAL CLOCK SET | [ 02 ] | |
| AUTO CLOCK CH | |
| D.S.T. | [OFF] |
3Begin “AUTO CLOCK CH SEARCH”
Hit [STOP/L] to select “AUTO | – SETTING CLOCK – | |
|
| |
CLOCK CH SEARCH”. | AUTO CLOCK | [ON] |
Then hit [F.FWD/ B]. | B AUTO CLOCK CH SEARCH | |
AUTO CLOCK CH | [ 02 ] | |
MANUAL CLOCK SET |
| |
• The unit begins searching for the | D.S.T. | [OFF] |
|
| |
station which contains the auto clock set signal. The search for a signal may take up to 20 seconds per channel.
• When the search has ended, “_ _” appears at the lower left of the screen.
•Write down the number(s) that
appear on the screen. They are the auto clock sta- tion(s) in your area.
•If no number(s) appear on the TV screen, there are no stations in your area which contain the Auto Clock signal. Auto Clock Setting is not possible. Please use Manual Clock Setting on page 13. Hit [MENU] to exit the screen.
NOTE:
•During AUTO CLOCK CH SEARCH, the picture may be distorted.
4Enter the channel number that contains the Automatic Clock Setting Signal
Follow step 1 above to select “SET- |
|
|
TING CLOCK” menu. | – SETTING CLOCK – | |
Hit [STOP/L] to select “AUTO | AUTO CLOCK | [ON] |
AUTO CLOCK CH SEARCH | ||
CLOCK CH”. | B AUTO CLOCK CH | [ 45] |
D.S.T. | [OFF] | |
| MANUAL CLOCK SET |
|
Press [REW/s] or [F.FWD/ B] until you locate Auto Clock Set sta-
tion number that you wrote down at step 3. Hit [MENU] to exit the screen.
5Turn off the unit
Once the unit is turned off, it will periodically check and set the correct date and time.
- 14 - | EN |
