Sylvania 6615LDF manual External Connection, VIDEO1 Input, VIDEO2 Input, Audio Output

EXTERNAL CONNECTION

[Rear of this unit]

AUDIO

VIDEO2

VIDEO1

You can connect this unit to your own Audio/Video equipment.

•Be sure to turn off the power to all components in the system before connecting another component.

•Refer to the Owner’s Manuals for the equipments to be connected to the unit.

NOTE

When you use external connections, select “VIDEO1” or “VIDEO2” by pressing [SELECT]. (Refer to page 12.)

•To use the VIDEO1 input jacks, select “VIDEO1”.

•To use the VIDEO2 input jacks, select “VIDEO2”.

- VIDEO1 INPUT

						ex.
			R		Audio Cable	(OUT)
AU		DIO				(OUT)
			L		Video Cable
VID	EO		1
	VIDE			O	OR
						Video Cassette
	S-V	IDEO
					S-Video Cable	(OUT) Recorder

Use this connection if your own A/V equipment (e.g. VCR) has Video output and Audio out jacks. When using S-Video cable, better picture is available.

NOTE

•If your own equipment is monaural (has only one Audio jack), connect the Audio cable to AUDIO L jack of this unit.

•If you connect Video jack and S-VIDEO jack simultaneously, the S-VIDEO jack is given priority over the VIDEO jack.

- VIDEO2 INPUT

		ex.
V I D E O 2	Audio Cable	(OUT)
R
AUDIO		Video Camera
L
COMPONENT	Component
Y
Pb	Video Cable	(OUT)
Pr

Video Game

Use this connection if your own A/V equipment (e.g. video camera, video game) has COMPONENT Video output (Y, Pb, Pr) jacks. You can enjoy the best picture with this connection.

- AUDIO OUTPUT

To COAXIAL DIGITAL

AUDIO INPUT jack

DIGITAL
AUDI	O OUT
(COAX		IAL)

Home Audio System

You can enjoy DVD sound with more presence by connecting digital audio equipment such as Dolby Digital decoder.

Dolby Digital decoder

NOTE

•The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital sound by an MD or DAT deck.

•If connected to a Dolby Digital decoder, set “DOLBY DIGITAL” to “BITSTREAM” for audio output in the setup mode. (Refer to page 30.)

•Unless connected to a Dolby Digital decoder, set “DOLBY DIGITAL” to “PCM” for audio output in the setup mode. Playing a unit using incorrect settings may generate noise distortion and may also damage the speakers. (Refer to page 30.)

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

- 11 - EN