- 19 - EN
1C29
TV OPERATION

DEGAUSSING

Magnetism from nearby appliances might affect the
color of the TVpicture.
If this happens, move this unit away from the appli-
ance. If the color is still not correct, disconnect power
cord from AC outlet then reconnect it after 30 minutes.

WA TCHING ATV PROGRAM

1Turn on the TV/DVD/VHS
Press the POWER button to turn on the
TV/DVD/VHS.
2Select the channel number
Press the CHANNELKor Lbutton to select your
desired channel number or press the number buttons
on the remote control.
Remember: If the TV/DVD/VHS is connected to a
cable box or satellite box, the TV/DVD/VHS must be
on CH3 or CH4, then the channel to be viewed must
be selected on the cable box or satellite box.
3Adjust sound
Press the VOLUME XXor YYbutton
to adjust the volume.
Arrow sArrow B
BRIGHT to decrease to increase
brightness brightness
CONTRAST to decrease to increase
contrast contrast
COLOR to pale to brilliant
TINT to purple to green
SHARPNESS to soft to clear

PICTURE CONTROL

The TV/DVD/VHS’s picture controls – BRIGHT,
CONTRAST, COLOR, TINTand SHARPNESS –
are preset to factory specifications. Although they are
usually the best, you may need to make some further
adjustments for a natural looking image.
NOTES:
•Procedures must be followed within 5 seconds or
the Picture Control mode will be cancelled.
•When setting the Picture Control, the Game mode
will be cancelled.
Make sure ...
•TV/DVD/VHS power must be turned on.
1Select “PICTURE CONTROL”
Press the PICTURE button on the remote control.
2Select item you want to adjust
Press the Arrow Kor Lbutton until desired control
is displayed.
BRIGHT
CONTRAST
COLOR
TINT
SHARPNESS
3Adjust the picture control
Press the Arrow Bor sbutton to adjust to your
desired level.
•If there is a powerfailure of any kind, the unit will
retain its memory forthis feature.
VOLUME 20
C C C C C C C C C C C C
BRIGHT
– PPPPPPPPPPPPPPCCPPPPPPPPPPPPPP +
TD350_01-35 01.5.21 4:41 PM Page 19