- 34 - EN
1C29

TO CHECK THE BEGIN/END TIME

1)Press the POWER button so that the REC indicator
goes off.
2)Press the SETUP button on the remote control.
3)Confirm “TIMER PROGRAMMING” is pointed.
4)Press the Arrow Bbutton. The details of programs
appear on the TVscreen.
5)Press the SETUP button on the remote control to
return to TVmode.
HINTS FOR AUTOMATICTIMER RECORDING
•Make sure the channel you want to record is prop-
erly set in advance.
•It is not necessary to press the RECORD button for
timer recording.
•Recording begins automatically at the Start time.
•If you are recording using a Timer mode, you may
not operate the unit manually.
•The erase-prevention tab on the cassette must be in
place (or you must put tape over the hole).
•If the erase-prevention tab is removed, the cassette
will be ejected when the POWER button is pressed
to off.
•If the tape runs out before the end time, the
TV/DVD/VHS will switch to the Stop mode imme-
diately, and the tape will be ejected.
AUTO RETURN
With this feature, after timer recording is finished,
the beginning of the recorded program(s) can be
searched for automatically.
1Select “USER’S SET UP”
Press the SETUPbutton on the
remote control.
Press the Arrow Kor Lbutton to
point to “USER’S SET UP”.
Then, press the Arrow Bbutton.
2Set “AUTO RETURN”to [ON]
Press the Arrow Kor Lbutton to
point to “AUTO RETURN”.
Press the Arrow Bor sbutton
until [ON] appears.
3Auto Return will begin
When all the timer recordings are completed, the
TV/DVD/VHS will rewind to the beginning of the
recorded program(s).
NOTE:
•If you press the POWER button while tape is
rewinding, the Auto Return will stop.
4Watch the recorded program
Press the PLAYbutton.

TO CANCEL THE AUTO RETURN

MODE

Repeat steps [1] and [2], select [OFF] using the
Arrow Bor sbutton.
If there is a powerfailure of any kind, the unit
will retain its memory forthis feature.
- TV/VCR SETUP -
TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SET UP
BUSER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
INDEX SEARCH
– USER’S SET UP–
RENTAL [OFF]
REPEAT PLAY [OFF]
BAUTO RETURN [ON]
VCR AUDIO [HIFI]
TV AUDIO [STEREO]
SLEEP TIMER
The Sleep Timer function turns off the
TV/DVD/VHS without using the POWER button
after a desired period of time.
NOTE:
•This function does not operate during Recording
mode.
1Select “SLEEP TIMER”
Press the SLEEPbutton on the remote control until
“SLEEPTIMER” appears.
2Set sleep time
Press the SLEEPbutton until your
desired sleep time appears.
Each additional push will increase
the time by 30 minutes up to 120
minutes.
After 5 seconds, exit the Sleep
Timer setting.

TO CANCEL THE SLEEP TIMER

Press the SLEEPbutton on the remote control until
“SLEEPTIMER” appears. Press the SLEEP button
until “SLEEP 0 MINUTES” appears.
SLEEP 120 MINUTES
TD350_01-35 01.5.21 4:41 PM Page 34