Sylvania 6727DD, 6719DD owner manual Automatic Clock Setting

AUTOMATIC CLOCK SETTING

Make sure ...

• The TV/DVD/VCR is turned on.

• Confirm the TV/DVD/VCR is receiving a RF

(Radio Frequency) signal from either an antenna or

cable system connection using the ANT IN jack on

the rear of the TV/DVD/VCR.

Press the Arrow button K or L to select “SETTING CLOCK”. Press the ENTER button to enter “SETTING CLOCK” menu. Press the Arrow button L to select “AUTO CLOCK CH”.

- TV/VCR SETUP -

TIMER PROGRAMMING

BSETTING CLOCK CHANNEL SET UP USER’S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN

TIME SEARCH INDEX SEARCH

–SETTING CLOCK –

NOTE:

•If a cable converter box is being used, make sure it is powered on.

•You must use the TV/DVD/VCR remote control to perform the clock setting procedure.

Press the ENTER button, then

press the Arrow button B or s	AUTO CLOCK	[ON]
	B AUTO CLOCK CH	[ 45]
	AUTO CLOCK CH SEARCH
until you locate Auto Clock Set	MANUAL CLOCK SET
	D.S.T.	[OFF]

station number. See item 3 above. Press the SETUP button to exit the screen.

1Select “SETTING CLOCK”

Press the SETUP button on the remote control.

Press the Arrow button K or L to select “SETTING CLOCK”. Press the ENTER button to enter “SETTING CLOCK” menu.

- TV/VCR SETUP -

TIMER PROGRAMMING

BSETTING CLOCK CHANNEL SET UP USER’S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN

TIME SEARCH INDEX SEARCH

5Turn off the TV/DVD/VCR

Once the TV/DVD/VCR is turned off , it will period- ically check and set the correct date and time.

2 Set “AUTO CLOCK” to [ON]	– SETTING CLOCK –
Press the ENTER button until	B AUTO CLOCK	[ON]
AUTO CLOCK [ON] appears.	AUTO CLOCK CH SEARCH
	MANUAL CLOCK SET	[02]
	AUTO CLOCK CH
	D.S.T.	[OFF]

3Begin “AUTO CLOCK CH SEARCH”

Press the Arrow button L to select “AUTO CLOCK CH SEARCH”.

Press the ENTER button.

– SETTING CLOCK –

•The TV/DVD/VCR is now searching for the station which contain the auto clock set signal. The search for a signal may take up to 20 seconds per channel.

•“_ _” appears at the lower left of the screen when the search has ended.

•Auto Clock station- write down the number(s) that appear on the screen. These are the auto clock station(s) in your area. See item 4 below.

AUTO CLOCK [ON]

BAUTO CLOCK CH SEARCH

AUTO CLOCK CH	[02]
MANUAL CLOCK SET
D.S.T.	[OFF]

– AUTO CLOCK CH SEARCH –

08 10 13

_ _

•If no number(s) appear on the TV screen, there are no stations in your area which contain the Auto Clock signal. Auto Clock Setting is not possible. Please use Manual Clock Setting on page 17.

Press the SETUP button to exit the screen. NOTE: During Auto Clock CH Search, the picture may be distorted. This is normal.

4Enter the channel number that contains the Automatic Clock Setting Signal

Press the SETUP button on the remote control.

- 18 - EN

1C29