Sylvania 6842THG owner manual Channel List, Manual Register, Display the setup screen

CHANNEL LIST

The Channel List function lets you skip the unnec- essary channels from the Channel registration list.

	STILL
-	0
SETUP	SCREEN
	MODE
	ENTER
BACK	INFO

1Display the setup screen.

•Press [SETUP].

The following setup screen is displayed.

2Select “CHANNEL” and press [ENTER] to con- firm.

• Using [K/L], select “Channel List”.

Channell

Autoscan

Channel List

Manual Register

Antenna

•Press [ENTER].

3Select the channel you want to skip.

• Using [K/L], select the channel.

Channell Listi

Highlight channels for			DTV	6
Ch Up/Down key selection.			DTV	8
				9
				27
			DTV	48
				58
			DTV	67
Ch Select		Watch/Skip	BACK
	ENTER		Back

•Press [ENTER], and the highlight on the selected channel disappears, then the channel is set as skip. With [CH K/L], you cannot select the channel set as skip.

•If you want to receive the skipped channel, select your desired channel and press [ENTER].

•If you skip a major channel, you skip the minor channels too.

NOTE:

•The channel with “DTV” indicated on the display is ATSC, otherwise the channel is NTSC.

4To exit the setup, press [SETUP].

MANUAL REGISTER

You can register remainder of channels that were not scanned by the Autoscan function due to the bad reception status at the initial setting.

1	2	3
4	5	6
7	8	9	AUDIO
			STILL
-	0
SETUP			SCREEN
			MODE	SETTINGS
		ENTER
BACK			INFO	CHANNEL
1 Display the setup screen.

• Press [SETUP].

The following setup screen is displayed.

2Select “CHANNEL” and press [ENTER] to con- firm.

• Using [K/L], select “Manual Register”.

Channell

Autoscan

Channel List

Manual Register

Antenna

•Press [ENTER].

3Select the channel you want to add.

•Using Channel number buttons, select your desired channel.

		11
Manuall Registeri
For Analog channels,		Register
select a channel to register
using number keys.
For Digital channels,
you must perform Autoscan function.
	BACK	Back
Ch Change

• Select “Register” with [ENTER].

4To exit the setup, press [SETUP].

NOTES:

•If the setup is completed successfully, “Registered to the channel list.” is shown on the screen.

•If “Video1” is being used set up will not be completed suc- cessfully. “Unavailable” will be shown on screen.

15

EN