Sylvania C6240VE owner manual Preset for Use, Hint

3. Preset for Use

Turn on the VCR for the first time

To Add/Delete Channels

Clock Set Up

1

Turn on the TV and set it to channel 3.

•If channel 3 is already occupied for broad- casting, see“RF Output Channel” section.

2	POWER		Remote Control	TV Screen
			LANGUAGE SELECT
			B ENGLISH		[ON]
	STOP	PLAY	FRANCAIS
			ESPAÑOL
		or
			F.FWD
3					CH 01
	F.FWD

AUTO SET UP

Do you connect the cable of the cable box or the satellite box to the VCR’s ANT IN jack?

Yes

Yes Press the MENU

button to exit
• Refer to “Hint for Cable Box or
Satellite Box” section on page 1.	No

No Please wait for a few minutes.

After scanning...

•The tuner stops on the lowest memorized channel.

•You can select only the channels memorized in VCR by using the CHANNEL buttons.

•If "AUTO SET UP" appears on the TV screen again, check the cable connections. Then, press the F.FWD button once again.

Hint

•Repeat these steps only if there was a power failure or if the VCR has been unplugged for more than 30 seconds.

To Select a Channel

You can select a channel by directly pressing the Number buttons on the remote control.

Notes for using the Number but- tons:

•When selecting cable channels which are higher than 99, enter channel numbers as a three-digit number.(For example: 117, press 1,1,7)

•You must precede single-digit channel numbers with a zero (For example: 02, 03, 04 and so on).

To Preset the Channel Again

1)Press the MENU button until the main menu appears.

2)Select "CHANNEL SET UP" by pressing the PLAY or STOP button. Then, press the F.FWD button.

3)Select "AUTO SET UP" by pressing the PLAY or STOP button. Then, press the F.FWD button. After scanning, the tuner stops on the lowest memorized channel.

To Change the On-Screen Language

1)Press the MENU button until the main menu appears.

2)Select "LANGUAGE SELECT" by pressing the PLAY or STOP button. Then, press the F.FWD button.

3)Select "ENGLISH" , "FRANCAIS" or "ESPAÑOL" by pressing the PLAY or STOP button. Then, press the C.RESET/EXIT but- ton.

Hint

•If you accidentally select Spanish or French and need English: Press the MENU button and choose SELEC. IDIOMA, or SELEC- TION LANGUE. Press the F.FWD button, and select ENGLISH. Finally, press the C.RESET/EXIT button.

1 MENU -MENU-

TIMER PROGRAMMING

AUTO REPEAT [OFF]

BCHANNEL SET UP

		CLOCK SET
		LANGUAGE SELECT
STOP	PLAY
	or
		F.FWD
2		CHANNEL SET UP
STOP	PLAY	AUTO SET UP

BMANUAL SET UP

or

		F.FWD
3		MANUAL SET UP
STOP	PLAY	CHANNEL 30 (CATV)
		ADD

or

Select the channel to be

added or deleted.

4		MANUAL SET UP
REW	F.FWD	CHANNEL 30	(CATV)
	or	ADD
		Select “ADD” or “DELETE”

5 To exit the	EXIT
	C.RESET

menu.

1 MENU		-MENU-
		TIMER PROGRAMMING
		AUTO REPEAT [OFF]
		CHANNEL SET UP
		B CLOCK SET
		LANGUAGE SELECT
STOP	PLAY
	or	• If the clock is not set, the
		CLOCK SET screen
		appears when you press
		the MENU button. In this
		case, go to step [2].

			F.FWD
2			CLOCK SET
STOP	PLAY	MONTH DAY		YEAR
		0 3	/ – –	– – – –
or		HOUR MINUTE		AM/PM
		– –	: – –	– –
		Select the current month
			F.FWD
3			CLOCK SET
STOP	PLAY	MONTH DAY		YEAR
		0 3	/ 1 5	– – – –
or		HOUR MINUTE		AM/PM
		– –	: – –	– –

Select the current day

			F.FWD
4			CLOCK SET
STOP	PLAY	MONTH DAY		YEAR
		0 3	/ 1 5	2 0 0	4
or		HOUR MINUTE		AM/PM
		– –	: – –	– –
		Select the current year
			F.FWD

55		CLOCK SET
STOP	PLAY	MONTH DAY	YEAR
		0 3 / 1 5 MON 2 0 0 4
or		HOUR MINUTE	AM/PM
		0 5 : – –	– –
		Select the current hour
		F.FWD

66			CLOCK SET
STOP	PLAY	MONTH DAY		YEAR
		0 3	/ 1 5 MON 2 0 0 4
or		HOUR MINUTE		AM/PM
		0 5	: 4 0	– –
		Select the current minute
			F.FWD

77		CLOCK SET
STOP	PLAY	MONTH DAY	YEAR
		0 3 / 1 5 MON 2 0 0 4
or		HOUR MINUTE	AM/PM
		0 5 : 4 0	P M AM
			B PM
		Select “AM” or “PM”

88 To exit the CLOCK SET screen.

F.FWD

HintHint

•To go back one step, press the REW button (during the steps [2] to [7].)

•Your clock setting will be lost if there is a power failure or if the VCR has been

unplugged for more than 30 seconds.

- 3 - EN