Sylvania DVC840G Setup Preparation for Use, Turn On the Unit for the First Time, Clock Setup

Setup

Preparation for Use

Turn On the Unit for the First Time

	VCR	Operation described in this manual are
		mainly based on the remote control.
1	Turn on the TV and set it to channel .
	• If channel  has been already occupied for broadcasting,
	see “RF Output Channel” section on page 6.
2	Select your language in the first time you turn on this unit.
	Then press [B] to go to next step.		LANGUAGE SELECT
			BENGLISH	[ON]
	POWER
			FRANCAIS
		or	ESPAÑOL
3	Press [B] to start Auto Set Up.			CH 01

AUTO SET UP

Do you connect the cable from the cable box or the satellite box to the unit’s ANT-IN jack?

YES NO

Yes Press [MENU] to exit.

• Refer to “Hint for Cable Box or Satellite Box” section on page 6.

Please wait for a few minutes. After scanning...

•The tuner stops on the lowest memorized channel.

•You can select only the channels memorized in this unit by using [SKIP/CH. G///K, H//L] (or [CHANNEL K///L]).

•If “AUTO SET UP” appears on the TV screen again, check the cable connections. Then, press [B] once again.

Hint

To Preset the Channel Again

1)Press [MENU] until the main menu appears.

2)Select “CHANNEL SET UP” by using [K//L], then press [B].

) Select “AUTO SET UP” by using [K//L], then press [B]. After scanning, the tuner stops on the lowest memorized channel.

To Change the On-Screen Language

1)Press [MENU] until the main menu appears.

2)Select “LANGUAGE SELECT” by using [K/L], then

press [B].

) Select “ENGLISH” , “FRANCAIS” or “ESPAÑOL” by

using [K/L] then press [CLEAR/C.RESET].

•If you accidentally select Spanish or French and need English: Press [MENU] and choose SELEC. IDIOMA or SELECTION LANGUE. Press [B] and select ENGLISH. Finally, press [CLEAR/C.RESET].

•To add or delete channels in this unit, [SKIP/CH. G/K, H/L] button works on the channel number memorized in this unit, [K/L] works on all.

Clock Setup

VCR

1 Press [MENU] and select “CLOCK SET”.	- M E N U -
Then press [B] to go to next step.	TIMER PROGRAMMING
	AUTO REPEAT [OFF]
MENU	CHANNEL SET UP
	BCLOCK SET
or	LANGUAGE SELECT

•If the clock is not set, the CLOCK SET screen appears when you press [MENU]. In this case, go to step 2.

•Repeat these steps only if either there was a power failure or this unit has been unplugged for more than 0 seconds.

To Select a Channel

You can select a channel by using the Number buttons or [SKIP/CH. G/K, H/L].

Notes for using the Number buttons:

•When selecting cable channels which are higher than 99, enter channel numbers as a three-digit number. (for exam- ple: 117, press [1], [1], [7])

•You must precede single-digit channel numbers with a zero. (for example: 02, 0, 04 and so on)

To Add or Delete Channels

VCR

1 Press [MENU] and select “CHANNEL SET UP”.	TIMER PROGRAMMING
	- M E N U -
Then press [B] to go to next step.	AUTO REPEAT [OFF]
	BCHANNEL SET UP
MENU	CLOCK SET
	LANGUAGE SELECT
or

•If the clock is not set, the “CLOCK SET” screen appears when you press [MENU]. In this case, press [MENU] again.

2 Select the current month.

Then press [B] to go to next step.

or

3 Select the current day.

Then press [B] to go to next step.

or

4 Select the current year.

Then press [B] to go to next step.

or

5 Select the current hour.

Then press [B] to go to next step.

or

6 Select the current minute.

Then press [B] to go to next step.

	CLOCK SET
MONTH DAY				YEAR
1 0	/	– –		– – – –
HOUR MINUTE				AM/PM
– –	:	– –		– –
	CLOCK SET
MONTH DAY				YEAR
1 0	/	0 2		– – – –
HOUR MINUTE				AM/PM
– –	:	– –		– –
	CLOCK SET
MONTH DAY				YEAR
1 0	/	0 2		2 0 0 6
HOUR MINUTE				AM/PM
– –	:	– –		– –
	CLOCK SET
MONTH DAY				YEAR
1 0	/	0 2	MON 2 0 0 6
HOUR MINUTE				AM/PM
0 5	:	– –		– –
	CLOCK SET
MONTH DAY				YEAR
1 0	/	0 2	MON 2 0 0 6

2 Select “MANUAL SET UP”.

CHANNEL SET UP

HOUR MINUTE	AM/PM
0 5 : 4 0	– –

Then press [B] to go to next step.	AUTO SET UP
	BMANUAL SET UP
or

CLOCK SET
MONTH DAY	YEAR
1 0 / 0 2 MON 2 0 0 6

3 Select the channel to be added or deleted.
or	or	or

MANUAL SET UP

CHANNEL 0 (CATV)

ADD

or

7 Select “AM” or “PM”.

or

HOUR MINUTE	AM/PM
0 5 : 4 0	P M AM

BPM

4	Select “ADD” or “DELETE”.
		or
5	To exit the menu	CLEAR/
		C. RESET

MANUAL SET UP

CHANNEL 0 (CATV)

DELETE

8 To exit the CLOCK SET screen

•To go back one step, press [s] (during steps 2 to 7).

•Your clock setting will be lost if either there is a power failure or this unit has been unplugged for more than 0 seconds.

– 8 – EN