Sylvania DVL120RB owner manual You can define a section to be played back repeatedly, Total line

A-B REPEAT PROGRAM (Audio CD)

DVD

CD

CD

You can define a section to be played back repeatedly.

1Press the A-B REPEAT button during playback.

¡The starting point (A) will then be Repeat

[ A - ]

selected.

1Press the MODE button in stop mode.

¡The program screen will appear.	Audio CD
	Program
	Total
	[Track]
	– –
	[Time]
	0:00:00	Track 00 / 15
		Start :		Delete :
			PLAY			CLEAR
		Random :	MODE		Exit :	RETURN

2Press the A-B REPEAT button again at the end point (B) of the desired section.

¡The selected section	will be Repeat
played back repeatedly.	[ A - B ]

2 Press the numeric buttons to

desired track numbers.
	Audio CD
¡The total playback time for the	Program
	Total
selected tracks will appear on the	[Track]
	[Time]
	12
TOTAL line.	0:47:29

enter the

02 05 07 14 01 09 13 10 03 11

08 04

Track 04 / 15

Start : PLAY Delete : CLEAR

Random : MODE Exit : RETURN

3Press the PLAY button.

3To exit A-B repeat playback, press the A-B REPEAT button and set it to OFF.

Repeat [ off ]

Notes

¡With DVDs, the A-B repeat section can be set only within the current title.

¡With audio CDs, the A-B repeat section can be set within the current track.

¡A-B repeat is not available with some scenes in DVD.

¡To cancel the A point which was set, press RETURN button.

¡Playback will start in the programmed order.

¡While the program is being played back, the STOP button works as follows.

¡Press the STOP button once and then the PLAY button again, playback will restart from the point where the STOP button was pressed. (Program continued)

¡Press the STOP button twice and then the PLAY button again, playback will restart from the first tune in the program in the usual way. (Program continued)

¡Press the STOP button three times and then the PLAY button again, playback will restart from the track in the usual way. (Program cleared)

Notes

¡Adding programs is not possible during program playback. You must stop the current playback before such operations can be carried out.

¡Press the CLEAR button to cancel a program. The most recently entered program will then be deleted.

¡Numbers which exceed the number of tracks on the disc in the tray are not accepted.

¡Playback from a desired track and random playback are not available during program playback.

¡Program settings are cleared when the power is turned off or the disc loading tray is opened.

¡If the track no. is once set in the program, the setting cannot be changed.

– 17 – EN

9F21