Sylvania DVR90VE owner manual Connection to an Audio System

Connections

Connection to an Audio System				Before
• When you change the connections, all devices should be turned off.				you
• Refer to each owner’s manual for further information on other devices.
Method 1		Method 2		start
Stereo system		Dolby Digital decoder,
	Analog audio	MD deck or DAT deck		Connections
	input jacks
AUDIO		COAXIAL	Digital audio
			input jack	Getting
Audio cable		Audio Coaxial
		Digital cable
(supplied)		(commercially
This unit		available)		started
	DVD/VCR	DIGITAL	DVD
			DIGITAL
	AUDIO OUT
AUDIO OUT		AUDIO OUT	AUDIO OUT
	L			Recording
	or
	R		COAXIAL
	DVD
	AUDIO
	OUT
	L			Playing
	R
		Note		discs
		• If output is Dolby Digital encoded audio, connect
		to a Dolby Digital decoder, and set “Dolby Digital”
		to “Stream” for the “Digital Out” setting in the
		SETUP menu. (Refer to pages 90-91.)		Editing
		channel surround format cannot be recorded as
		• The audio source on a disc in a Dolby Digital 5.1
		digital sound by an MD or DAT deck.
		• Unless connected to a Dolby Digital decoder, set		Changingthe
		rect settings may generate noise distortion, and may
		“Dolby Digital” to “PCM” for the “Digital Out” set-
		ting in the SETUP menu. Playing a DVD using incor-		SETUP
		• Set “Dolby Digital” to “PCM” for the “Digital Out”
		also damage the speakers. (Refer to pages 90-91.)
		setting in the SETUP menu for connecting to an		menu
		MD deck or DAT deck. (Refer to pages 90-91.)
		• By hooking this unit up to a Multi-channel Dolby		VCR
		Digital decoder, you can enjoy high-quality Dolby
		Digital 5.1 channel surround sound as heard in the		functions
		movie theaters.
				Others
			15	Español