Sylvania DVR95DF One-touch Timer Recording, Turn on the unit and load a recordable disc

Recording

One-touch Timer Recording

Before you

VideoVR

DVD-RW DVD-RW DVD-R

This is a simple way to set the recording time in blocks of 30 minutes. Check that the disc you are recording onto has enough space for the time you set. After finishing the recording, the recorder automatically goes into standby.

1

Turn on the unit and load a recordable disc.

Make sure that the TV input is set on the unit.

This operation may take a while to be recognized.

2

Using [REC SPEED], select a recording speed.

Refer to “Recording speed” on page 24.

3

Make sure that the recording format is set to the desired mode.

Refer to “Formatting a disc” on pages 26-27.

When a DVD-RW disc is loaded:

You can choose Video mode or VR mode from the Setting menu. “Video mode” has been selected as the default. Refer to page 26 “Choosing the recording format of a blank disc.”

When a DVD-R disc is loaded:

DVD-R discs will always be in Video mode.

4

Using [CH K / L] or the

Number buttons, select a desired channel to record.

5

Hit [REC/OTR] repeatedly to select a desired recording time. Recording times appear on the TV screen (30 minutes to 4 hours). Recording will start.

I0:30

0:30

OFF1:00

(Normal Recording)

4:00 3:30

When the unit reaches the speci- fied time, it will be turned off automatically.

To change the recording time dur- ing the One-touch Timer Recording, hit [REC/OTR] repeatedly until the desired time appear.

To cancel the One-touch Timer Recording within the specified time, hit [STOP C] .

This operation may take a while to be completed.

	POWER		TIMER	OPEN/CLOSE
		ZOOM
			PROG.	A
4	.@/:	ABC	DEF
	1	2	3
	GHI	JKL	MNO	CH
	4	5	6
	PQRS	TUV	WXYZ	REPEAT
	7	8	9
	DISPLAY	SPACE	CLEAR	SETUP
		0
	TOP MENU	MENU/LIST	RETURN	ENTER

K

{B

L

2	REC SPEED	REV	PLAY	FWD
		h	B	g
	REC	SKIP	PAUSE	SKIP
	MONITOR				5
		H	F	G
5	REC/OTR		STOP	CM SKIP
			C

Note

•The remaining recording time will appear on the dis- play panel during an One- touch Timer Recording. Hit [DISPLAY] to see it on the TV screen.

•You cannot pause a One-touch Timer Recording.

•Unlike a Timer Recording, you can perform the following operations during a One-touch Timer Recording.

-Turning off the power.

-Using [REC/OTR] and [STOP C].

•The unit will be turned off automatically under the follow- ing conditions.

1) No space remained on the disc.

2) When a power failure occurs.

•When OTR is finished and the power is turned off, the unit will switch to the standby mode automatically if a Timer Recording has been pro- grammed. Hit [POWER] to cancel the standby mode for using the unit continuously.

start Connections Getting started Recording Disc Playback Editing Changing the Setting menu Others

Español

29