39
Recording / Dubbing
Before you
start
Recording /
Dubbing Playback Editing
Connections Other Setups VCR functions Others Español
Initial Setups
6Press REC / OTR(HDD / DVD) repeatedly to
change the recording time.
The recording time will be extended by 30 minutes
every time you press REC / OTR(HDD / DVD).
• The maximum recording time is 8 hours.
• With HDD / DVD OTR,the recording time that
exceeds the remaining time of the recording
media will not be displayed.
• To change the recording time during the
One Touch Recording,Press REC / OTR (HDD /
DVD) repeatedly.
7When OTR ends,the unit will turn off automatically
except under conditions listed below.
- If a Timer Recording is programmed to start in 5
minutes.
- During playback of HDD / DVD / VCR.
- During recording of HDD / DVD / VCR.
- While displaying menus or information on the
screen.
• To cancel the OTR in progress,press STOP C.
0:30
(Normal Recording)
8:00 7:30
1:00
I HDD Rec 0:06:50 CH8
HDD MODE
OTR (0:30)
65:56LP
One Touch Recording (OTR)
This is a simple way to set the recording time in blocks of
30 minutes.
If you are recording to the HDD,press HDDfirst.
If you are recording to a disc,press DVD first.
Preparing for OTR:
•Check that the recording media has enough recordable
space for the time you set.
•If you are recording to a DVD,insert a recordable disc.
•Use only the HDD or CPRM-compatible VR mode
DVD-RW discs for recording copy-once programs.
(See page 31.)
1
Turn on the TV. Select the appropriate external input
channel.(See page 18.)
2Using REC MODE,select a Rec Mode.
Refer to ‘Rec Mode’ on page 30.
• You can check the current Rec Mode by pressing
REC MONITOR.
3If you are using a DVD-RW disc,make sure that the
recording format is set to the desired mode.
Refer to ‘Formatting a Disc’ on pages 34–35.
4Using CHANNEL / or the Number
Buttons,select a desired channel to record.
5Press REC / OTR(HDD / DVD).
Recording will start.
I HDD Rec 0:06:50 CH8
65:56LP
HDD MODE
DVD-R
DVD-R
HDDHDDHDD
Note
•The remaining recording time will be displayed on the
Front Panel Display during a One Touch Recording.
Press DISPLAYto see it on the TV screen.
•You cannot pause a One Touch Recording.
•The unit will turn off automatically under the
following conditions.
-When a power failure occurs.
4380_029-065.qx3 05.11.16 2:28 PM Page 39