INITIAL SETTING
5Main Menu
This section describes the overview of the main menu displayed when you press [SETUP]. For more details, see the reference page for each item. The main menu consists of the function setting items below.
5Auto Channel Scan
If you switch wires (e.g., between antenna and CATV) or if you move the TV to a different area after the initial setting, or if you restore the DTV channel you deleted, you will need to perform auto channel scan.
Press [SETUP].
•EXIT
To exit settings.
•PICTURE
You can adjust the picture quality.
(Refer to “Picture Adjustment” on page 24.)
•SOUND
You can adjust the sound quality.
(Refer to “Sound Adjustment” on page 25.)
•CHANNEL
You can automatically scan the viewable channels and remove those that are undesired.
(Refer to “Auto Channel Scan” on page 14.)
•DETAIL
You can change the display format for closed caption, which displays the dialogue of a TV program or other information across the TV screen.
(Refer to “Closed Caption” on page 26.) Set the viewing limitations.
(Refer to
Adjust the position, stability and clarity of the PC screen.
(Refer to “PC Settings” on page 33.)
And select the sound input for the HDMI jack if your TV is connected to a HDMI device.
(Refer to “HDMI Audio” on page 34.)
•LANGUAGE
You can change the language (English, Spanish, French) displayed on the main menu.
(Refer to “Language Selection” on page 15.)
Before you begin:
Make sure if the unit is connected to antenna or cable.
1Press [SETUP] to display the main menu.
2Use [Cursor K/L] to select “CHANNEL” , then press [ENTER].
3Use [Cursor K/L] to select “Autoscan”, then press [ENTER].
Channell
Autoscan
Channel List
Manual Register
Antenna
Use [Cursor K/L] to select an appropriate option, then press [ENTER].
Autoscan
Autoscan will rescan all channels. | Back | |
This may take a while to complete. | Air | |
|
| |
Select the destination of "ANT.IN" jack. | Cable | |
|
| |
Air |
| Cable |
| 1hour | |
|
| |
Cable | Or |
|
| ANT.IN |
|
•When aerial antenna is connected, select “Air”.
•When connected to CATV, select “Cable”.
•Scanning and memorizing of channels start automatically.
Now the system is scanning for channels, please wait.
72%
| Analog channels |
| 10ch |
|
|
|
|
|
|
|
|
|
|
|
| ||
| Digital channels |
| 6ch |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| SETUP | Exit | |||
|
| ||||
|
|
|
|
|
|
•When the scanning and memorizing are completed, the lowest memorized channel will be displayed.
14
EN
