Sylvania lc320ss8 5PC Settings, Horizontal Position, Vertical Position, Clock, Phase, Cursor s

5PC Settings

This function lets you adjust the PC screen position, clock and phase during PC input.

1Press [SETUP] to display the main menu.

2Use [Cursor K/L] to select “DETAIL”, then press [ENTER].

3Use [Cursor K/L] to select “PC settings”, then press [ENTER].

Detailil

Closed Caption

V–chip

PC Settings

HDMI1 Audio Auto

5 Adjust the setting.
Auto Adjustment
Use [Cursor K/L] to select “Adjust”, then press
[ENTER].
	Auto Adjustmentj
	This function automatically	Cancel
	adjusts the position, clock and
	phase of the picture element.	Adjust

•The Horizontal/Vertical position, clock and phase of the PC screen are automatically adjusted.

Horizontal Position, Vertical Position

Use [Cursor s/B] to adjust.

		Cursor s	Cursor B
Horizontal Position		to move PC	to move PC
H. Position	0
		screen left	screen right
Adjust	Move
		ENTER Enter
Vertical Position		to move PC	to move PC
V. Position	0
		screen down	screen up
Adjust	Move
		ENTER Enter

INTRODUCTION CONNECTION INITIAL SETTING WATCHING TV OPTIONAL SETTING

4Use [Cursor K/L] to select the setting you want to adjust, then press [ENTER].

PC Settingsi

Auto Adjustment

Horizontal Position	- -
Vertical Position	- -
Clock	- -
Phase	- -

Clock, Phase

Use [Cursor {/B] to adjust the “Clock” setting to stabilize the PC screen and the “Phase” setting to improve the clarity of the PC screen.

			Cursor s	Cursor B
Clock
Clock	0
Adjust	Move	ENTER Enter	to decrease	to increase
Phase			setting value	setting value
Phase	0
Adjust	Move	ENTER Enter

6Press [SETUP] to exit.

TROUBLESHOOTING INFORMATION

Note:

•Adjust the “Phase” setting after the “Clock” setting has been properly adjusted.

•You may not obtain an appropriate screen with auto adjustment for some signals. In this case, adjust the settings manually.

33

EN