Xerox Phaser 860 manual Printing on Special Media, Printing on Phaser High-Resolution Photo Paper

Printing on Special Media

In addition to bond paper, the printer can print on the following special media:

■Phaser High-Resolution Photo Paper

■Phaser Labels and Phaser Business Cards — see page 30

■Phaser 860 Transparencies — see page 32

■Envelopes — see page 34

■Letterhead paper — see page 38

Printing on Phaser High-Resolution Photo Paper

The Phaser High-Resolution Photo Paper can be printed on one side only, since it has a Xerox logo on the reverse side. Refer to page 5 for more information.

1.You can either:

■Place up to 50 sheets of the photo paper face up in the standard paper/transparency tray. Make sure that the tray switch is set to Paper (forward position).

■Choose to manually feed the paper. Don’t place the photo paper in the manual-feed slot until you are prompted by the printer’s front panel to do so.

2.In the printer driver:

■Select the tray containing the high-resolution photo paper (Upper Tray) or Manual Feed-Paper.

■Select one-sided printing.

■Select High-Resolution/Photo for the Print Quality mode.

3.Send the job to the printer.

4.If you selected Manual Feed-Paper, wait until the printer’s front panel prompts you, then insert the first sheet face down in the manual-feed slot. Wait until you are prompted again before adding the next sheet.

Special Media

User Guide 29