Xerox Phaser 860 Dont load paper above the fill line on the left side of the tray, Loading Trays

4.Slide the ream of paper into the tray so that the paper rests up against the angled paper stop at the rear of the tray. The stack of paper should assume the same angle as the paper stop.

0726-10

Note

Don't load paper above the fill line on the left side of the tray.

Loading Trays

0726-77

Note

If you are loading letterhead and printing on one side of the paper, place the paper face up with the letterhead toward the front of the tray. For two-sided jobs, place the letterhead paper face down with the letterhead toward the back of the tray.

5.Remove any sheets that are damaged.

20 Phaser 860 Color Printer