Xerox manual Images are too light or too dark, Print Quality, Phaser 860 Color Printer

Images are too light or too dark

■Pull out the tray and check the position of the switch on the front-right side of the tray. Push it forward for paper (or labels) and backward for transparencies. After setting the switch correctly, slide the tray back in.

Paper (or Label) Transparency

Transparency Paper

Transparency

Paper

Transparency

Label

0726-04

Transparency

Label

0726-05

■Select another print quality mode in the printer driver, then print the job again; refer to page 11.

■Select another color correction in the printer driver, then print the job again; refer to page 12.

Print Quality

46 Phaser 860 Color Printer