Xerox manual Printing two-sided jobs, Sided Printing, Phaser 860 Color Printer

2-Sided Printing

Printing two-sided jobs

1.You can either:

■Place the paper in the standard paper/transparency tray (with the tray switch set to Paper), legal tray, or a high capacity paper tray, depending on its size. If you are printing on letterhead, refer to page 38.

■Choose to manually feed the paper. Don’t place the paper in the manual-feed slot until you are prompted by the printer’s front panel to do so.

2.In the printer driver:

■Select the tray containing the paper or Manual Feed-Paper.

■Select two-sided printing. Refer to the table on page 41 for the wording used in the printer drivers.

3.Send the job to the printer.

4.If you selected Manual Feed-Paper, wait until the printer’s front panel prompts you, then insert the first sheet of paper in the manual-feed slot. Wait until you are prompted again before adding the next sheet.

Note

When the printer prints a two-sided job, the paper partially exits then is fed back in to print on the second side. To avoid paper jams, do not touch the paper before it completely exits the printer.

40 Phaser 860 Color Printer