Xerox Phaser 860 manual Paper, Printing on transparencies, Transpa rency, 0726-73, Special Media

Special Media

Printing on transparencies

Note

Use only Phaser 860 Premium or Standard Transparencies. Refer to page 6 for more information. Handle transparencies by the edges and with both hands to avoid fingerprints and creases, which can cause poor print quality.

To print on transparencies:

1.You can either:

■Place transparencies in the standard paper/transparency tray (up to 50 sheets) or high capacity transparency/label tray (up to 175 sheets) so that the notch of the transparencies is in the back-right corner of the tray. Make sure the tray switch is set to Transparency (back position).

Transparency
Paper		0726-73
	TranspLabelarency

■Choose to manually feed the transparencies. Don’t place a transparency in the manual-feed slot until you are prompted by the printer’s front panel to do so.

2.In the printer driver:

■Select the tray containing the transparencies (Upper Tray) or Manual Feed-Transparency.

■Select one-sided printing.

3.Send the job to the printer.

32 Phaser 860 Color Printer