Xerox Phaser 860 manual Maintenance, User Guide

Note

The maintenance drawer is locked during the warm-up cycle whenever the printer is turned on and while the ink

cools after the Eliminate Light Stripes troubleshooting routine. If the maintenance drawer is locked, close all covers and wait 15 minutes before repeating steps 1 and 2.

3.Lift the waste tray (labeled B) from the maintenance drawer. The waste tray may be hot; handle it carefully!

0726-49

4.Empty the waste tray by gently twisting the tray or tapping it on the sides of a waste container. Ink is non-toxic and can be discarded as normal office waste.

0726-56

5.Re-insert the waste tray in the maintenance drawer. Make sure the tray is seated flat in the drawer.

0726-34

Maintenance

User Guide 59