Sylvania LD190SS1 owner manual Repeat A-B Playback Programmed Playback,  Random Playback

OPERATING DVD

Repeat A-B Playback		Programmed Playback
You can repeat playback between A and B on a disc.		CD
1 During playback, press [MODE] repeatedly until		You may determine the order in which tracks will play back.
“ A B ” appears.
		1 In stop mode, press [MODE] repeatedly until
	A B OFF (A-B REPEAT)
		“PROGRAM” menu appears.

2 Press [ENTER] at your desired starting point (A).

A B A- (A-B REPEAT)

PROGRAM
	CD-DA				TOTAL	0:00:00
	T	1	3:31
	T	2	4:28
	T	3	4:19
	T	4	3:58
	T	5	4:12
	T	6	4:02
ENTER/OK	T	7	3:55	3	1/	1
PLAY			1/
CLEAR	T 1 3:31

3 Press [ENTER] at your desired ending point (B).

A B A-B(A-B REPEAT)

•Point B should be in the same title or track as point A.

•Within a few seconds, the section A-B will begin to play back repeatedly.

4 To cancel repeat A-B playback, press [MODE] repeatedly until “ A B “ appears.

Press [ENTER] so “OFF” appears.

Note:

•Repeat setting (except “ALL”) will be cleared when moving to another title or chapter, track.

•During programmed playback, repeat setting will be effective for the tracks in the program.

•Repeat playback or repeat A-B playback may not available with some discs.

•Repeat A-B playback does not function during other repeat mode.

•To cancel point A, press [CLEAR] at step 2 in “Repeat A-B Playback”.

•Stopping playback will cancel repeat A-B playback.

Random Playback

CD

This function shuffles the playing order of tracks instead of playback in the sequence.

1 In stop mode, press [MODE] repeatedly until “RANDOM” menu appears.

RANDOM

CD-DA TOTAL 0:45:55

RANDOM PROGRAM

--no indication--

PLAY

2 Press [PLAY B] to start random playback.

Note:

•To repeat the current track in the random mode, follow the

steps 1 and 2 in “Repeat Playback” on page 39 and select “TRACK”.

•To repeat the entire random selections, follow the steps 1 and 2 in “Repeat Playback” on page 39 and select “ALL”.

40

2 Use [Cursor K / L] to select a desired track, then press [ENTER] to store.

•Additional tracks may be on other screens. Use [Cursor K / L] to go on to the next / previous pages.

•Repeat this step until you have selected all the tracks you wish to play back in the program.

PROGRAM
	CD-DA			TOTAL		0:08:22
or	T 15	3:18		T	4	3:58
	T 16	4:24		T 16		4:24
	ALL CLEAR
ENTER/OK		3/	3		1/	1
PLAY
CLEAR	T 16 4:24

•Up to 99 tracks can be ordered.

•If 8 or more tracks were in a program, use [SKIP H/ G] to see all the tracks.

3 Press [PLAY B] to start programmed playback.

Note:

•Press [CLEAR] to erase the last track in the program if you make an error.

•To erase all programmed tracks at once, select “ALL CLEAR” and press [ENTER] at step 2.

•While a program is being played back, [STOP C] works as follows:

-Pressing [STOP C] once: The track will be in the resume standby mode. Next time you press [PLAY B], the playback will resume from the point where it is stopped in the programmed playback.

-Pressing [STOP C] twice: Resume mode will be canceled. Next time you press [PLAY B], playback will restart from the first track in the original order. However, your programmed playback can be restarted when you follow the above steps. (Your programs are still stored until either the disc is ejected or the unit is turned off.)

-On some discs, [STOP C] will not work while the resume message appears. Please wait until the message disappears.

•To repeat the current track in the program, follow the steps 1 and 2 in “Repeat Playback” on page 39 and select “TRACK”.

•To repeat the entire program, follow the steps 1 and 2 in “Repeat Playback” on page 39 and select “ALL”.

•Turning off the unit or ejecting the disc will erase the program.

•You cannot use [the Number buttons] to select another track during programmed playback. Use [SKIP H/ G] to select other tracks in the program.

•You cannot combine random playback with programmed playback.

•You cannot alter a programmed order during playback.

•You can start programmed playback only while in “PROGRAM” menu.

EN