Sylvania LD190SS1 owner manual  DVD Audio Setting, Down Sampling

DVD Audio Setting

Choose the appropriate audio settings for your equipment. It only affects during the playback of DVD.

1 Press [SETUP] to display the main menu.

2 Use [Cursor K/ L] to select “DVD”, then press [ENTER].

Setup

Press “ENTER” key to move to DVD Setup.

3 Use [Cursor s / B] to select “ ”, then press [ENTER].

AUDIO
DRC	ON
DOWN SAMPLING	ON
DOLBY DIGITAL	BITSTREAM
ENTER/OK

4 Use [Cursor K/ L] to select the desired item, then press

[ENTER].

DRC (dynamic range control) (Default: ON)

This function is available only on the discs which are recorded in the Dolby Digital format.

AUDIO
DRC	ON
DOWN SAMPLING	ON
DOLBY DIGITAL	BITSTREAM
ENTER/OK

ON : Compress the range between soft and loud sounds.

OFF : No effects (original sound).

Español Français English

INTRODUCTION

DOWN SAMPLING (Default: ON)

This function is available only on digital outputting of a			PREPARATION
disc recorded in 96kHz.
	AUDIO
	DRC	ON
	DOWN SAMPLING	ON
	DOLBY DIGITAL	BITSTREAM	WATCHING
	ENTER/OK
ON : When outputting in 48kHz.			TV
OFF : When outputting the original sound.
Note:			OPTIONAL
“DOWN SAMPLING” is set to “OFF”.
• When playing back a 96 kHz disc with the copyright
protection or when ‘‘Virtual Surround” is set to “1” or “2”,
the sound will be down sampled at 48 kHz even if the
Refer to “Virtual Surround” on page 43.			SETTING
DOLBY DIGITAL	(Default: BITSTREAM)
Set to “BITSTREAM“ when this unit is connected to a			OPERATING
	AUDIO
Dolby Digital decoder.
	DRC	ON	DVD
	DOWN SAMPLING	ON
	DOLBY DIGITAL	BITSTREAM
	ENTER/OK
	(2 channel)		DVD
			SETTING
BITSTREAM : Outputs Dolby Digital signals.
PCM :	Converts the Dolby Digital into PCM.

5 Press [SETUP] to exit. TROUBLESHOOTING

INFORMATION

45

EN