- 10 - EN
9I03

INSTALLING THE BATTERIES

1) Open the battery compartment cover by pressing
the cover on the remote unit in the direction of the
arrow.
2) Insert 2 “AA” penlight batteries into the battery
compartment in the direction indicated by the
polarity (+/-) markings.
3) Replace the cover.
SET UP FOR USE
1Plug in the TV/VCR power cord
Plug the TV/VCR power cord into a
standard AC outlet.
NOTE:
•If some digits appear in the corner of
the screen, press the POWER button
without unplugging the power cord.
Make sure ...
•Press the POWER button to turn on the TV/VCR.
NOTE: This function effects only the language on
the screen menu and not the audio source.
2Select “LANGUAGE”
Press the MENU button on the
remote control.
Press the PLAY/Kor STOP/Lbut-
ton to point to “LANGUAGE”.
3Select “ENGLISH”,“ESPAÑOL”or
“FRANÇAIS”
Select “ENGLISH”, “ESPAÑOL”= Spanish or
“FRANÇAIS”= French using the F.FWD/Bor
REW/sbutton.
SELECTING THE LANGUAGE 4Exit the Language mode
Press the MENU button on the remote control to
return to TVmode.
NOTE: If for some reason the menu is in Spanish or
French, press the MENU button on the remote con-
trol, press the PLAY/Kbutton to point to “IDIOMA
[ESPAÑOL]” or “LANGAGE [FRANÇAIS]”, then
press the F.FWD/Bbutton, then press the MENU
button on the remote control.

EXTERNAL INPUT MODE

When using an external input signal (another VCR or
camcorder), connect the player’s audio/video output
cables to the AUDIO IN/ VIDEO IN jacks of your
TV/VCR. Then press the CHANNELKor Lbutton
until “AUX” appears on the screen.
NOTE: “AUX” is found below the
lowest memorized channel.
(Example: CH2)
TO RECORD A SCRAMBLED/UNSCRAMBLED
CHANNEL
1. Set the TV/VCR channel selector to the output
channel of the Cable Converter Box or Satellite
Box. (Ex. CH3)
2. Select the channel to record from your Cable
Converter Box or Satellite Box.
AUX

CLOCK SET UP

(AUTO / MANUAL)

– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
BLANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH The TV/VCR clock must be set correctly before VCR
timer recording is possible. It is suggested that the
clock be set manually when first setting up the
TV/VCR, then set to [ON] the auto clock setting
which will periodically correct the setting if necessary.
NOTE: If you cannot receive a station with time
signals, auto clock setting cannot be performed. Use
manual setting only.