- 12 - EN
9I03
DAYLIGHT-SAVING TIME
Select this feature and the TV/VCR’s clock automati-
cally will advance one hour in April, then reverse one
hour in October.
When Daylight-Saving Time is ON, the clock will
change automatically as follows:
•First Sunday of April :At 2 AM the clock imme-
diately changes to 3 AM. Any timer programming
you have set to occur between 2 AM and 3 AM
will not record.
•Last Sunday of October :At 2 AM the clock
immediately changes to 1 AM.
Make sure ...
•Press the POWER button to turn on the TV/VCR.
1Select “SETTING CLOCK”
Press the MENU button on the
remote control.
Press the PLAY/Kor STOP/Lbut-
ton to point to “SETTING
CLOCK”.
Then press the F.FWD/Bbutton.
2Set “D.S.T.”(Daylight-Saving Time) to [ON]
Press the PLAY/Kor STOP/Lbut-
ton to point to “D.S.T.”.
Then press the F.FWD/Bor
REW/sbutton until [ON] appears.
3Exit the Daylight-Saving Time mode
Press the MENU button on the remote control to
return to TVmode.

TO CANCEL THE DAYLIGHT-SAVING

TIME

Repeat steps [1] to [2], select [OFF] using the
F.FWD/Bor REW/sbutton.
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
BSETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
– SETTING CLOCK –
AUTO CLOCK [ON]
AUTO CLOCK CH SEARCH
AUTO CLOCK CH [ 02 ]
MANUAL CLOCK SET
BD.S.T. [ON]
5Turn off the TV/VCR
Once the TV/VCR is turned off , it will periodically
check and set the correct date and time.
1Select “SETTING CLOCK”
Press the MENU button on the
remote control.
Press the PLAY/Kor STOP/Lbut-
ton to select “SETTING CLOCK”.
Press the F.FWD/Bbutton to enter
“SETTING CLOCK” menu.
2Set “AUTO CLOCK”to [ON]
Press the F.FWD/Bbutton until
“AUTOCLOCK [ON]” appears.
3Begin “AUTO CLOCK CH SEARCH”
Press the STOP/Lbutton to select
“AUTO CLOCK CH SEARCH”.
Press the F.FWD/Bbutton.
•The TV/VCR is now searching
for the station which contain the
auto clock set signal. The search
for a signal may take up to 20
seconds per channel.
•“_ _” appears at the lower left of
the screen when the search has
ended.
•Auto Clock station- write down
the number(s) that appear on the
screen. These are the auto clock
station(s) in your area. See item
4 below.
•If no number(s) appear on the TVscreen, there are
no stations in your area which contain the Auto
Clock signal. Auto Clock Setting is not possible.
Please use Manual Clock Setting on page 11.
Press the MENU button to exit the screen.
NOTE: During Auto Clock CH Search, the picture
may be distorted, this is normal.
4Enter the channel number that contains the
Automatic Clock Setting Signal
Press the MENU button on the remote control.
Press the PLAY/Kor STOP/Lbut-
ton to select “SETTING CLOCK”.
Press the F.FWD/Bbutton to
enter “SETTING CLOCK” menu.
Press the STOP/Lbutton to select
“AUTO CLOCK CH”.
Press the F.FWD/Bor REW/s
buttons until you locate Auto
Clock Set station number. See
item 3 above.
Press the MENU button to exit the
screen.
– SETTING CLOCK –
BAUTO CLOCK [ON]
AUTO CLOCK CH SEARCH
AUTO CLOCK CH [ 02 ]
MANUAL CLOCK SET
D.S.T. [OFF]
– SETTING CLOCK –
AUTO CLOCK [ON]
BAUTO CLOCK CH SEARCH
AUTO CLOCK CH [ 02 ]
MANUAL CLOCK SET
D.S.T. [OFF]
– AUTO CLOCK CH SEARCH –
08 10 13
_ _
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
BSETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
BSETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
– SETTING CLOCK –
AUTO CLOCK [ON]
AUTO CLOCK CH SEARCH
BAUTO CLOCK CH [ 45]
MANUAL CLOCK SET
D.S.T. [OFF]