9
Operations
TO PLAY A CD
1. Insert a CD.
2. Press the POWER button to turn the unit on;
3. The LCD display will light. Slide the RADIO/CD switch to the CD
position. (The total number of track will appear in the display).
4. Press the PLAY/PAUSE button to start playback.
5. TO PAUSE PLAYBACK, press the PLAY/PAUSE button again; the display
will briefly blink. Press again to resume playback.
6. To skip forward or backward through the tracks on the disc, press the SKIP
button. To search forward or backward through the tracks on the disc, press
and hold the SKIP button.
7. Adjust the VOLUME control as desired. Press the DISPLAY button when the
time is showing to see the number of tracks on the CD.
8. When the disc is through playing, it will stop. Press the STOP button to stop
the disc before it is finished.
Note: If a disc is inserted incorrectly, dirty, damaged or not present at all, the
display will show, "Err".
TO REPEATEDLY PLAY BACK ONE TRACK
1. Press the REPEAT button once; the RPT indicator will blink.
2. Press the SKIP/FWD or SKIP/REV buttons to select a track and the PLAY/
PAUSE button to start playback and the unit will play the same track over
and over until the STOP button is pressed.
TO REPEATEDLY PLAY BACK ALL TRACKS
1. Press the REPEAT button twice; the RPT indicator will light solid.
2. Press the PLAY/PAUSE button to start playback and the unit will then play
all the tracks on the CD over and over until the STOP button is pressed.