Notice:
1.Car cigarette lighter adaptor can't be used to recharge the battery.
2.Car cigarette lighter adaptor is available to use only when the carpower supply is 9-12V.

Powering and installation

Plug one end of the AC/DC power adaptor into the DC IN 9-12V jack on the right of the
machine, then plug the other end into the AC power receptacle. Please refer to the
following illustration
If using car cigarette lighter adaptor to connect to the power:
Plug one end of the cigarette lighter adaptor into the DC IN 9-12V jack on the unit, plug
the other end into the car cigarette lighter socket. See illustration below.
System Connection

5

4

DC OUT
DC IN 9-12V
AV OUT
DC OUT
DC IN 9-12V
AV OUT

Connecting to the monitor

The unit can also be connected to the external LCD monitor.
Connect the unit to power by AC/DC adapter or cigarette lighter adapter.
Then connect the unit DC OUT jack to DC IN 9-12V Jack of the LCD Monitor by a DC/AV
cable. Also use this DC/AV cable to connect the AV OUT jack of the unit to AV IN
jack of the Monitor.
Please refer to the illustration below.
Note: You're advised to supply both units the power by the cigarette lighter adapter
only. The AC/DC adapter is used to supply power of one unit only.
ON/OFF
DC OUT
DC IN 9-12V
AV OUT
Using SD/MMC card
Upon using an SD or MMC card, insert it into the corresponding slot flatly with the label
side frontward until you hear a click.
Using USB
Upon using an USB, insert it into the USB slot directly.