User Manual

Installation

1.Choose a suitable site for the base unit

Make sure it is not near to another telephone, nor to other electrical equipment.

2.Plug the mains power lead and the telephone line cord into the rear of the base unit

3.Plug the mains adapter into a 230 V AC, 50 Hz mains socket, with the switch on the socket set to OFF

Note: The illustration of adaptor may vary from country to country.

4.Switch on mains power at the socket

5.Fit the batteries in the handset(s)

Insert the rechargeable batteries following the batteries polarity indication.

Fit the batteries compartment cover, Sliding it until it clicks firmly into Position.

6

Page 7
Image 7
Shiro SD8501 user manual Installation, Choose a suitable site for the base unit