User Manual
The Handset and Base Unit
MENU Button
Press to enter menu mode and enter
CALL Button
Press to begin, answer and end a telephone call.
UP and DOWN Button
In standby mode, press to show phonebook list
Press during programming to move through the menu.
Press during a call to change the volume in the earpiece.
Clear button
Press and hold
Press during programming to go back to the previous option, or to clear digits one by one from the display. Press during a call to mute the microphone.
CHARGE light
The CHARGE light comes on when the handset's batteries are being charged.
Before you can use the handset to make calls for the first time, you will need to fit and fully charge the battery for 15 hours.
Phonebook Button
In standby mode, press to enter phonebook menu
Press to confirm selection.
You need the button if you phone is Connected to a PABX
INT Button
Press to make an intercom call (if you have more than one handset)
SPEAKERPHONE Button
Press to turn the speakerphone ON/OFF
IN USE light
The IN USE light comes on when you have a connection to the telephone line.
HANDSET LOCATOR button
Press this to make the handset ring,
if you cannot remember where you put it.
Press it again to stop the handset ringing.
3
