The Use of Remote Control
Please put the battery into the remote control as per below illustration
1
2
CR2025 | CR2025 |
Basic Operation
DVD | MPEG4 | SVCD | VCD | CD | MP3 | Xvid |
Playing disc of DVD, MPEG4, SVCD, VCD, CD, MP3, Xvid
1.After connecting power to the unit, turn on the unit by sliding the ON/OFF switch to ON,the source menu will be displayed on the screen:
DVD
MEDIA
When using remote control, make sure the infrared window is pointed to infrared receiving window of the machine. The distance between machine and remote control must be within 3 metres. Please refer to the following illustration
|
| PLAY/ |
|
| PAUSE |
|
| SETUP |
|
| MENU |
|
| MODE |
|
| 0 |
30 | 0 | 30 |
|
|
Press 
to enter DVD mode or Media mode and press OK button to confirm. When selecting “Media”, ensure to insert USB or SD/MMC card properly
2.Open the disc door and insert a disc into the door with the label side facing up.
3.Close the disc door. The unit will load the disc and start playing.
4.Press 
to once to stop playback; then press 
to resume playback from
the point where you stoped; press | twice to stop playback completely). |
Notice
1.To avoid falling off or place near damp environment.
2.To avoid infrared receiving window of the unit being under direct sunlight 3.Please use a new battery to replace old one if the remote control doesn't work.
5.During playback, press 
to pause; press it again to resume playback.
6.When the playing is finished, please turn off the power by sliding ON/OFF switch to OFF.
7.For some DVD disc with Title or Chapter menu, press “ MENU” button to
enter menu page, and use 
to select. Press ENTER to confirm.
Note: Please do not disconnect USB devices or plug out SD/MMC cards while they are working with the unit. Functional failure may occur in case of wrong operations.
Title 
Menu
Cursor button
ENTER
play/pause 
8 | 9 |
