TV OPERATION
WATCHING A TV PROGRAM
1Turn on the TV/VCR
Press the POWER button to turn on the TV/VCR.
2Select the channel number
Press the CHANNEL K or L button to select your desired channel number or press the number buttons on the remote control.
Remember: If the TV/VCR is connected to a cable box or satellite box, the TV/VCR must be on CH3 or CH4, then the channel to be viewed must be selected on the cable box or satellite box.
PICTURE CONTROL
The TV/VCR’s picture controls – BRIGHT, CON- TRAST, COLOR, TINT and SHARPNESS – are preset to factory specifications. Although they are usually the best, you may need to make some further adjustments for a natural looking image.
NOTES:
•Procedures must be followed within 5 seconds or the Picture Control mode will be cancelled.
•When setting the Picture Control, the Game mode will be cancelled.
Make sure ...
•TV/VCR power must be turned on.
3Adjust sound
Press the VOLUME X or Y button to adjust the volume.
VOLUME 20
C C C C C C C C C C C C
GAME MODE
1Select “PICTURE CONTROL”
Press the MENU button on the remote control.
Press the PLAY/K or STOP/L but- ton to point to ”PICTURE CON- TROL”.
Then, press the F.FWD/B button.
– M E N U –
TIMER PROGRAMMING
BPICTURE CONTROL SETTING CLOCK CHANNEL SET UP USER’S SET UP
TIME SEARCH INDEX SEARCH
This function enables you to decrease the TV screen contrast and making it suitable for use with a Video game system.
NOTE: This function CANNOT be set during recording.
Press the GAME button on the | GAME |
| |
remote control. “GAME” appears |
|
on the screen. |
|
When you press the GAME button;
•The TV/VCR turns on automatically.
•The TV/VCR will select front A/V input mode automatically.
2Select item you want to adjust
Press the PLAY/K or STOP/L button until desired control is displayed.
BRIGHT CONTRAST
COLOR | BRIGHT |
TINT | – P P P P P P P C P P P P P P P + |
| |
SHARPNESS |
|
3Adjust the picture control
Press the F.FWD/B or REW/s button to adjust to your desired level.
TO CANCEL THE GAME MODE
Press the GAME button or CHANNEL K or L but- ton on the remote control.
DEGAUSSING
This television has a degaussing circuit that will clear up color errors on the TV screen that are caused by any excess magnetism which happens to get too close to the TV. This circuit is designed to operate once when the set is first plugged in. If minor color errors are seen in some locations on the screen, please unplug the TV for approximately 15 minutes. When the TV is plugged back in, the degaussing circuit will operate once to clear them up. Repeat this procedure any time the TV screen is accidentally magnetized, or when the TV is moved or relocated.
| REW/s | F.FWD/B |
|
|
|
BRIGHT | to decrease | to increase |
| brightness | brightness |
|
|
|
CONTRAST | to decrease | to increase |
| contrast | contrast |
|
|
|
COLOR | to pale | to brilliant |
|
|
|
TINT | to purple | to green |
SHARPNESS | to soft | to clear |
|
|
|
•If there is a power failure of any kind, the unit will retain its setting.
- 14 - | EN |
