CONNECTING TO RECEIVER WITH A DOLBY DIGITAL DECODER

(for DVD)

If using this TV/VCR/DVD to play a DVD disc in a 5.1 channel Dolby Digital surround format, the TV/VCR/DVD outputs a DOLBY DIGITAL Data stream from its COAXIAL digital audio out jack. By hook- ing the TV/VCR/DVD up to a Dolby Digital decoder, you can enjoy a more convincing, realistic surround sound as enjoyed in movie theaters.

Use audio coaxial digital cables available at retail stores for the audio connection.

Center

speaker

Front speaker (left)

Receiver with Dolby

Digital decoder

Surround

speaker (left)

Front speaker

 

 

(right)

ANT.

AUDIO OUT

COAXIAL

 

 

 

To COAXIAL DIGITAL

DIGITAL AUDIO OUT

COAXIAL

AUDIO INPUT jack

 

Surround

Subwoofer

 

speaker

 

 

(right)

 

 

 

 

[Fig. 7]

NOTES:

Be sure to turn off the power to all components in the system before connecting them together.

Refer to the Owner's Manuals for the components to be connected to the TV/VCR/DVD.

If connected to a receiver with a Dolby Digital decoder, set DOLBY DIGITAL to ON for audio output in the setup mode. (See page 45 to set DOLBY DIGITAL to ON.)

Unless connected to a receiver with a Dolby Digital decoder, set DOLBY DIGITAL to OFF for audio out- put in the setup mode. Playing a DVD using incorrect settings may generate noise distortion and may also damage the speakers.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

- 14 -

EN

1C29

Page 14
Image 14
Sylvania SRCD420P owner manual Connecting to Receiver with a Dolby Digital Decoder, For DVD