TO CHECK THE BEGIN/END TIME
1)Press the POWER button so that the Recording indicator goes off.
2)Press the SETUP button on the remote control. 3)Confirm “TIMER PROGRAMMING” is pointed. 4)Press the ENTER button. The details of programs
appear on the TV screen.
5)Press the SETUP button on the remote control to return to TV mode.
HINTS FOR AUTOMATIC
TIMER RECORDING
TV/VCR
•Make sure the channel you want to record is prop- erly set in advance.
•It is not necessary to press the RECORD button for timer recording.
•Recording begins automatically at the Start time.
•The display will not be turned on when the programmed recording begins. To watch the currently recorded TV program or to play a DVD disc, press the POWER but- ton to turn on the display and use the SELECT button to choose the TV/VCR mode or the DVD mode.
•The
•If the
•If the tape runs out before the end time, the TV/VCR/DVD will switch to the Stop mode immediately and the tape will be ejected.
AUTO RETURN
TV/VCR
With this feature, after timer recording is finished, the beginning of the recorded program(s) can be searched for automatically.
3Auto Return will begin
When all the timer recordings are completed, the TV/VCR/DVD will rewind to the beginning of the recorded program(s).
NOTE:
•If you press the POWER button while tape is rewinding, the Auto Return will stop.
4Watch the recorded program
Press the PLAY button.
TO CANCEL THE AUTO RETURN MODE
Repeat steps [1] to [2], select [OFF] using the ENTER button.
If there is a power failure of any kind, the TV/VCR/DVD will retain its memory for this fea- ture.
SLEEP TIMER
TV/VCR
The Sleep Timer function turns off the TV/VCR/DVD without using the POWER button after a desired period of time.
NOTE:
•This function does not operate during Recording mode.
1Select “SLEEP TIMER”
Press the SLEEP button on the remote control until “SLEEP TIMER” appears.
2Set sleep time
Press the SLEEP button until your desired sleep time appears.
Each additional push will increase the time by 30 minutes up to 120
1 Select “USER’S SET UP” |
- TV/VCR SETUP -
minutes.
SLEEP 120 MINUTES
Press the SETUP button on the |
remote control. |
Press the Arrow button K or L to |
point to “USER’S SET UP”. |
Then press the ENTER button. |
TIMER PROGRAMMING SETTING CLOCK CHANNEL SET UP
BUSER’S SET UP
TIME SEARCH INDEX SEARCH
After 5 seconds, exit the Sleep Timer setting.
TO CANCEL THE SLEEP TIMER
Press the SLEEP button on the remote control until “SLEEP TIMER” appears. Press the SLEEP button until “SLEEP 0 MINUTES” appears.
2Set “AUTO RETURN” to [ON]
– USER’S SET UP –
Press the Arrow button K or L to point to “AUTO RETURN”.
Press the ENTER button until [ON] appears.
RENTAL | [OFF] |
REPEAT PLAY | [OFF] |
B AUTO RETURN | [ON] |
VCR AUDIO | [HIFI] |
TV AUDIO | [STEREO] |
- 34 - | EN |
1C29
