Sylvania SSC727B TIMER PROGRAM EXTENSION, , , ,

- 33 - EN

1F12

To shift the time schedule of an automatic timer

recording.

1)Press the POWER button.

2)Repeat step [1] on page 32.

3)Press the RECORD button and select the desired

program using the Arrow Kor Lbutton.

4)Press the RECORD button again.

Each additional push will shift forward the

begin/end time for recording by 10 minutes. When

the recording is already in progress, each additional

push will shift forward the end time only. If you

want to cancel while setting, press the PAUSE but-

ton on the remote control. The recording time

returns to the original time.

NOTE: When you shift forward the time schedule

during recording, the recording speed will automati-

cally be set to the SLPmode.

5)Press the Arrow Bor sbutton to exit the setting

menu. Then press the SETUPbutton on the remote

control to return to original mode.

TO CORRECT APROGRAM

•While setting a program; press the Arrow sbut-

ton to go back one step and enter the correct num-

bers using the Arrow Kor Lbutton.

•After setting a program;

1)Press the POWER button.

2)Repeat steps [1] - [2] on page 32.

3)Press the Arrow Bbutton (or press the Arrow s

button to go back one step) until the part you

want to correct begins flashing, then make the

changes pressing the Arrow Kor Lbutton.

4)Press the POWER button to set automatic timer

recording.

TO CANCELAN AUTOMATIC TIMER

RECORDING

•After setting a program;

1)Press the POWER button.

2)Repeat steps [1] ~ [2] on page 32 and select a

program you want to cancel.

3)Press the C.RESET button.

4)Press the SETUP button on the remote control to

return to TVmode.

•While recording is in progress;

1)Press POWER button.

2)Press the STOP/EJECT button on the

TV/DVD/VHS.

5Set beginning hour

Press the Arrow Kor Lbutton until

the desired hour appears.

(Example: “ 7, PM” for 7:30PM)

Then, press the Arrow Bbutton.

6Set beginning minute

Press the Arrow Kor Lbutton until

the desired minute appears.

(Example: “30” for 7:30PM)

Then, press the Arrow Bbutton.

7Set end hour

Press the Arrow Kor Lbutton until

the desired hour appears.

(Example: “8, PM” for 8:50PM)

Then, press the Arrow Bbutton.

8Set end minute

Press the Arrow Kor Lbutton

until the desired minute appears.

(Example: “50” for 8:50PM)

Then, press the Arrow Bbutton.

9Set the tape speed

Press the Arrow Kor Lbutton

until the desired tape speed

appears. (Example: SP)

10 Finish setting the program

Press the Arrow Bor sbutton. The program is now

completed.

•To set anotherprogram, repeat steps [2] to [10].

•Press the SETUPbutton on the remote control to

return to original mode.

11 Set the timer

Press the POWER button to set automatic timer

recording. The TIMER REC indicator lights up.

•You must turn off the TV/DVD/VHS to activate

automatic timer recording.

If power is not turned off and you continue watch-

ing TV, “TIMER REC STANDBY” starts flashing

on the TVscreen 2 minutes before the programmed

start time.

TIMER PROGRAM EXTENSION

– TIMER PROGRAMMING –

CH DATE BEGIN END

- - -/- - - - - -:- - -:- -- -

B61 7/06 FRI 7:12PM-:- - - -

- - -/- - - - - -:- - -:- -- -

– TIMER PROGRAMMING –

CH DATE BEGIN END

- - -/- - - - - -:- - -:- -- -

B61 7/06 FRI 7:30PM-:- - - -

- - -/- - - - - -:- - -:- -- -

– TIMER PROGRAMMING –

CH DATE BEGIN END

- - -/- - - - - -:- - -:- -- -

B61 7/06 FRI 7:30PM8:30PM- -

- - -/- - - - - -:- - -:- -- -

– TIMER PROGRAMMING –

CH DATE BEGIN END

- - -/- - - - - -:- - -:- -- -

B61 7/06 FRI 7:30PM8:50PM- -

- - -/- - - - - -:- - -:- -- -

– TIMER PROGRAMMING –

CH DATE BEGIN END

- - -/- - - - - -:- - -:- -- -

B61 7/06 FRI 7:30PM8:50PMSP

- - -/- - - - - -:- - -:- -- -

TD374_01-35 01.8.3 5:07 PM Page 33