Sylvania SSL15D5 manual External Connection, VIDEO1 Input, VIDEO2 Input, Audio Output

EXTERNAL CONNECTION

[Rear of this unit]

AUDIO

VIDEO2

VIDEO1

(CADUIGODAITIXOAIAOLLU)T

VID	EO 2	R
	AUDIO
		L
	COMPONENT
		Y
		Pb
		Pr
		R
	AUDI	O
			L
	O1
VIDEVIDEO
	S-VIDE		O
	ANT
	PHON		E
HEAD

You can connect this unit to your own Audio/Video equipment.

• Be sure to turn off the power to all components in the system before connecting another component.

• Refer to the Owner’s Manuals for the equipments to be connected to the unit.

NOTE

When you use external connections, select “VIDEO1” or “VIDEO2” by pressing [SELECT]. (Refer to page 12.)

•To use the VIDEO1 input jacks, select “VIDEO1”.

•To use the VIDEO2 input jacks, select “VIDEO2”.

- VIDEO1 INPUT

					(IN)	Audio Cable
			R
AU		DIO
			L			Video Cable
					(IN)
	EO		1
VID
	VIDE			O		OR
					(IN)
	S-V	IDEO				S-Video Cable

ex.	Use this connection if your own A/V equipment (e.g.
(OUT)	VCR) has Video output and Audio out jacks. When
(OUT)	using S-Video cable, better picture is available.
(OUT)
Video Cassette
Recorder

NOTE

•If your own equipment is monaural (has only one Audio jack), connect the Audio cable to AUDIO L jack of this unit.

•If you connect Video jack and S-VIDEO jack simultaneously, the S-VIDEO jack is given priority over the VIDEO jack.

- VIDEO2 INPUT

			ex.
V I D E O 2		Audio Cable
R
AUDIO	(IN)	(OUT)	Video Camera
L
COMPONENT		Component
Y
		Video Cable
Pb	(IN)	(OUT)
Pr

Use this connection if your own A/V equipment (e.g. video camera, video game) has COMPONENT Video output (Y, Pb, Pr) jacks. You can enjoy the best picture with this connection.

Video Game

- AUDIO OUTPUT

To COAXIAL DIGITAL

AUDIO INPUT jack

DIGITAL			(OUT)
AUDI	O	OUT
(COAX		IAL)

Home Audio System

You can enjoy DVD sound with more presence by connecting digital audio equipment such as Dolby Digital decoder.

Dolby Digital decoder

NOTE

•The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital sound by an MD or DAT deck.

•If connected to a Dolby Digital decoder, set “DOLBY DIGITAL” to “BITSTREAM” for audio output in the setup mode. (Refer to page 30.)

•Unless connected to a Dolby Digital decoder, set “DOLBY DIGITAL” to “PCM” for audio output in the setup mode. Playing a unit using incorrect settings may generate noise distortion and may also damage the speakers. (Refer to page 30.)

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

- 11 - EN