PREPARATION FOR USE
LANGUAGE SELECTION
If you want to change the language of the
1
Connect the power cord to a standard AC outlet.
2
4
Press the CH(annel) ▲ or ▼ button to point to "AUTO MEMO". Then, press the VOL(ume) ▲ button.
The tuner scans and memorizes all active channels in your area.
● The TV distinguishes between standard TV channels |
ADD/DELETE AUTO MEMO
Press the POWER button to turn on the TV.
3
Press the MENU button so that the menu display appears on the TV screen.
4
Press the CH(annel) ▲ or ▼ button to point to "[ENGLISH]".
5
Select "ENGLISH" or "ESPAÑ OL" = Spanish by using the VOL(ume) ▲ or ▼ button.
PICTURE CHANNEL SET [ENGLISH]ESPAÑOL
PICTURE CHANNEL SET 
[ENGLISH]ESPAÑOL
and cable (CATV) channels. |
● When AUTO MEMO action is completed, the lowest |
memorized channel reappears on the screen. |
● When you press the CH(annel) ▲ or ▼ button after |
selecting AUTO MEMO, the tuner will stop at the memorized |
channels only. |
● The TV may detect TV channels as CATV channels |
if the receiving conditions are poor. In this case, try AUTO MEMO action |
again when receiving conditions are better. |
[ADD/DELETE FUNCTION]
6
Press the MENU button to exit the menu.
CHANNEL PRESETTING
NOTE:You MUST PRESET channels BEFORE using CHANNEL ▲/▼ button. To preset a channel or to change a preset channel, follow the procedure below.
1)Press the MENU button so that the menu display appears on the TV screen.
2)Press the CH(annel) ▲ or ▼ button to point to "CHANNEL SET". Then, press the VOL(ume) ▲ button.
3)Press the VOL(ume) ▲ button so that "ADD/DELETE" is selected.
4)Use the CH(annel) ▲ or ▼ button to select the
channel you wish to put into memory or to erase from memory. Note: The display will return to a normal screen in about 10 seconds. Perform "ADD/DELETE" function while this display appears on the
PICTURE 
CHANNEL SET [ENGLISH]ESPAÑOL
ADD/DELETE
AUTO MEMO
1
Press the POWER button to turn on the TV.
2
Press the MENU button so that the menu display appears on the TV screen.
3
Press the CH(annel) ▲ or ▼ button to point to "CHANNEL SET". Then, press the VOL(ume) ▲ button.
PICTURE CHANNEL SET [ENGLISH]ESPAÑOL
PICTURE 
CHANNEL SET [ENGLISH]ESPAÑOL
screen.
●Press the VOL(ume) ▲ or ▼ button to light up the channel number in LIGHT BLUE if you wish to add the channel into memory.
●Press the VOL(ume) ▲ or ▼ button to light up the channel number
in LIGHT RED if you wish to erase the channel from memory.
5) Press the MENU button to exit the menu.
RESUME FUNCTION
If the power fails or is disconnected while the TV is powered on, the TV will turn on automatical- ly when the power resumes.
OPERATIONS
WATCHING A TV PROGRAM | PICTURE ADJUSTMENT |
1)Press the POWER button to turn on the TV.
2)Select the desired channel with the CH(annel) ▲ or ▼ button.
3)Adjust the volume to the desired listening level using the VOL(ume) ▲ or ▼ button.
4)Adjust picture controls for a natural looking image. (See "PICTURE ADJUSTMENT".)
SETTING THE SLEEP TIMER
The sleep timer function enables you to shut off the power without pressing the POWER button after a desired time period.
1)Press the POWER button to turn on the TV and press the SLEEP button on the remote control .
2) You may change the sleep time by pressing the SLEEP button on the remote control repeatedly. The timer can be set up to 90 minutes, 10 minutes each time the SLEEP button is pushed. (The timer display counts up and sleep timer will
1)Press the MENU button so that the menu display appears on the TV screen.
2)Press the VOL(ume) ▲ button so that "PICTURE" is selected.
3)Select the feature you wish to adjust with the CH(annel) ▲ or ▼ button and adjust it with the VOL(ume) ▲ or ▼ button.
GAME MODE | Notes: |
Set to the most suitable position for TV | ● In the above steps, the picture adjustment |
GAME. | display will disappear from the TV screen |
[+] : ON | automatically after about 10 seconds if you |
[ - ] : OFF | do not press any buttons, even though you |
BRIGHT | may not be finished. Press the MENU and |
Adjust until the whitest parts of the picture are | VOL(ume) ▲ button so that "PICTURE" is |
as bright as you prefer. | selected. Then, press the CH(annel) ▲ or ▼ |
[+] : increase brightness | button repeatedly until the display returns to |
[ - ] : decrease brightness | the screen. |
be displayed on the screen when you press the SLEEP
Press the SLEEP button repeatedly
CONTRAST | ● If you adjust the other Picture control after |
button on remote control.)
until "SLEEP 0" is displayed.
Adjust to increase or decrease contrast. | you set the Game mode to [ON], the Game |
|
Note: When you disconnect the unit from the AC outlet, or if you have a power failure, the sleep time will be lost.
CLOSED CAPTION SELECTION
You may view specially labeled (cc) TV pro- | 1) Press the MENU button so that the menu | ||||||
grams, movies, news, prerecorded tapes, etc. |
| display appears on the TV screen. | |||||
with either a dialogue caption or text display | 2) Press the CH(annel) ▲ or ▼ button to point | ||||||
added to the program. |
|
|
|
| to "CAPTION". |
| |
|
|
|
| 3) Press the VOL(ume) ▲ or ▼ button to select | |||
|
|
|
|
| the mode you wish. |
| |
|
|
|
| 4) When done, press the MENU button to exit | |||
: Press the VOL(ume) ▲ or ▼ button. |
|
|
| the menu. |
|
| |
|
|
|
|
|
|
|
|
PICTURE | PICTURE | PICTURE |
|
| PICTURE | PICTURE | |
CHANNEL SET | CHANNEL SET | CHANNEL SET |
| CHANNEL SET | CHANNEL SET | ||
[ENGLISH]ESPAÑOL | [ENGLISH]ESPAÑOL | [ENGLISH]ESPAÑOL | [ENGLISH]ESPAÑOL | [ENGLISH]ESPAÑOL | |||
| |||||||
CAPTION [OFF] | CAPTION [ C1] | CAPTION [ C2] |
| CAPTION [ T1] | CAPTION [ T2] | ||
[+] : increase contrast | mode is set to [OFF] automatically. | |
| ||
[ - ] : decrease contrast | [USING THE GAME BUTTON] | |
COLOR | ||
You may also set the Game mode and external | ||
Adjust to be brilliant or pale color. | ||
input mode at the same time by pressing the | ||
[+] : be brilliant color | ||
GAME button on the remote control. “GAME” | ||
[ - ] : be pale color | ||
appears on the TV screen. | ||
TINT | ||
● To exit the Game mode and external input | ||
Adjust to obtain natural skin tones. | ||
mode, press the GAME button on the remote | ||
[+] : greenish tone | ||
control again. | ||
[ - ] : reddish tone | ||
● To cancel the Game mode only, adjust the | ||
| ||
| picture control. In this case, “VIDEO” instead | |
| of “GAME” appears on the TV screen. | |
| ● If you press the GAME button when the TV | |
| is off, the TV turns on and will be in the | |
| Game mode and external input mode auto- | |
| matically. | |
|
| |
: Press the CH(annel) ▲ or ▼ button. |
| |
|
|
GAME MODE [+] | BRIGHT | [+] | COLOR | [+] | TINT | [+] | ||||||||||
OFF | ON |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
