2 Select “ALL” or “BLANK” | – USER’S SET UP – | |
| ||
Press the PLAY/K or STOP/L | RENTAL | [OFF] |
button to point to “REPEAT | B REPEAT PLAY | [ALL] |
AUTO RETURN | [OFF] | |
PLAY”.
Press the F.FWD/B or REW/s
button repeatedly until your desired selection [ALL] or [BLANK] appears.
3Exit the Repeat Play setting
Press the MENU button on the remote control to return to the TV mode.
4Start playback
Press the PLAY button to start the Repeat Play. ”REPEAT PLAY B” appears.
•Once you select the Repeat Play mode, it stays in effect even after you turn off the TV/VCR.
•If the Rental mode is set [ON], the “RENTAL PLAY B” display has priority.
TO CANCEL THE REPEAT PLAY MODE
Repeat steps [1] and [2], select [OFF] using the F.FWD/B or REW/s button on the remote control. Press the MENU button on the remote control to return to TV mode.
If there is a power failure of any kind, the unit will retain its memory for this feature.
SEARCH
PICTURE SEARCH
This feature is very useful in finding or skipping over a particular scene on a tape. In this mode, the sound will be muted.
1)You may view a video tape at a high speed in either a forward or reverse direction by pressing the F.FWD or REW button during playback. (in the SP / LP / SLP modes)
2)Press it again and the TV/VCR will now search in super high speed. (in the LP / SLP modes only) NOTE: Tapes recorded in the SP or LP mode will display a noise bar on the TV screen and the pic- ture may revert to Black and White. This is normal.
3)Press the PLAY button to return to normal speed.
ZERO RETURN
This function allows you to search easily a beginning point that you want to review by rewinding or fast forwarding.
NOTE:
Zero Return WILL NOT work on a blank tape or a blank portion of a tape.
1Stop a tape at your desired point
Rewind or fast forward the tape to the beginning point at which you want to review.
2Reset the counter to 0:00:00
Press the COUNTER RESET button repeatedly.
3Begin recording or playback
Press the RECORD or PLAY button.
Press the STOP button when recording or playback is completed.
4To activate “ZERO RETURN” mode
Press the MENU button on the remote control. Press the PLAY/K or STOP/L button to point to “ZERO RETURN”.
Then, press the F.FWD/B button. The counter will appear on the TV screen.
The tape will automatically stop when the counter returns to 0:00:00.
NOTES:
•Time Search can be set up to a maximum of 9 hours 50 minutes (9:50) by 10 minutes at a time.
•This function will not operate in recording mode. In the example below: To watch a program after 2 hour 50 minutes from the present position, in either direction.
1Insert a tape.
2Select “TIME SEARCH” mode
Press the TIME SEARCH button (with each push it will increase by 10 minute).
3Enter your desired time
TIME SEARCH
TIME SEARCH
The Time Search function makes it possible to quickly advance the tape to your desired position
Press the PLAY/K or STOP/L but- ton until your desired time appears. (Example: “2:50” stands for 2 hours 50 minutes)
2 : 50
simply by entering the exact amount of playback time you want to skip.
If you wish to cancel the Time Search at this point, press the MENU button on the remote control.
- 18 - | EN |
