Symbol Technologies CDM-8910WW warranty To insert a pause, enter a phone number then

BASIC FUNCTIONS

SPEAKERPHONE

The speakerphone feature lets you hear audio through the speaker and talk without holding the phone.

C	1 To activate the speakerphone in idle, answering
H	or calling modes, press and hold	.
2

2The phone returns to normal (speakerphone off) after ending a call or when the phone is turned off and back on.

PAUSEFEATURE

Pauses are used for automated systems (i.e., voice mail, calling cards). Insert a pause after a phone number then enter another group of numbers. The second set of numbers is dialed automatically after the pause. This feature is useful for dialing into systems that require a code.

1To insert a pause, enter a phone number then

press [MENU]. Select either a Hard Pause (“P” appears) or a Timed Pause (“T” appears).

2Press to dial or [SAVE] to store.

Please refer to page 30 for more details about storing a phone number.

BASIC FUNCTIONS

ANSWERINGACALL

1To answer a call, press any key except , ,

or .

• By pressing	, you can select either “Any		C
			H
Key” or “Send Key” to answer a call. lf “Send Key” is selected,			2
the phone can only be answered by pressing		.

2To end the call, press .

In Auto Answer Mode a call is automatically answered after a preset number of ring tones. See page 72 for more details.

3-WAYCALLFUNCTION

With 3-Way Calling, you can talk to two people at the same time. When using this feature, the normal airtime rates will be applied for each of the two calls.

1Enter a number you wish to call, then press .

2Once you have established the connection, enter the second number you wish to call, then

press .

3When you’re connected to the second party,

press again to begin your 3-Way call.

If one of the people you called hangs up during your call, you and the remaining caller stay connected. If you initiated the call and are the first to hang up, all three callers are disconnected.

22 23